Table of Contents
Advertisement
Rain sensor
The rain sensor automatically adjusts the windscreen wiper timing
to the intensity of the rain. The system is activated by moving the
windscreen wiper to AUTO.
When operating automatically, the wiper speed ranges from a
minimum intermittent setting (one wipe every 5 seconds approx.)
when the windscreen is damp to fast continuous operation in heavy
rain.
Important note
The rain sensor function is deactivated by turning the ignition
key to position 0 and leaving the windscreen wiper in position
AUTO. To reactivate the system at the next key-on, set the
wipers to AUTO by quickly pressing the lever A towards the
dashboard.
Warning
Before cleaning the front windscreen (for example in service
stations) make sure the rain sensor is deactivated or that the key
is in position 0. The rain sensor must be deactivated also when
washing the vehicle by hand or in automatic car washes.
In case of ice or snow on the front windscreen, do not activate
the rain sensor to avoid damaging the wiper motor and/or
blades.
Rain sensor failure
If there is a rain sensor failure, indicated by a special symbol on
the left TFT display (see page 118) while the windscreen wiper
is set to AUTO, the wipers will be set to intermittent operation
with one wipe every 1 second approximately. If this is the case, we
recommend that you deactivate the rain sensor and turn on the
wipers, if necessary, in continuous mode.
Important note
If this occurs, contact the Ferrari Service Network as soon as
possible.
About your Vehicle
4
131
Advertisement
Table of Contents
