Multi-Function Display - Ferrari F430 SPIDER Owner's Manual

Multi-function display

9 - Multi-function display
Incorporated in the instrument panel, it
diagnoses and signals any faults. It may
have the following colours:
Green = Normal driving conditions
Red = When a fault occurs
Amber = When one of the available systems
has been activated
Multi-function display signals
The multi-function display shows symbols
relative to fault conditions and the state of
the vehicle.
If more than one fault occur at the same
time, they are displayed for a length of time
depending on their priority.
The signals of the tyre pressure monitoring
system (optional) that may appear on the
multi-function display are described on
138.
The following symbols may be displayed:
Check OK
When the ignition key is turned
to position II , the electronic
system runs a diagnostic check
of the vehicle and, if no faults
are found, the symbol
illuminates to indicate that the
vehicle can be started.
34
Fuel tank door open
Indicates that the fuel tank door
is open or not properly closed.
Outside temperature
If selected with the relevant
button, it displays the outside
temperature (see
Clock
Displays the time It can be
disabled with the multi-function
button (see
If the battery is removed, the
exact time will have to be reset using the
multi-function buttons (see
CST active
While driving, it indicates that
the CST has been activated.
page
CST inactive
Indicates a malfunction or
that the CST system has been
deactivated using the switch on
the steering wheel (see
Low fuel
Check OK
Indicates that only 18÷20 litres
of fuel are left in the tank or that
the level gauge is malfunctioning.
Fuel supply cut-off
Suspension system
page 40).
Contact the Ferrari Service Network.
Instrument panel lighting
page 41).
page 41).
Slow Down
Contact the Ferrari Service Network.
page 24).
Hazard warning lights
Indicates that the inertia switch
has tripped, in the event of an
accident, and that consequently
the fuel supply has been cut off.
While driving, it indicates a
malfunction in the suspension
system.
If selected with the relevant
button, it adjusts the brightness
level of the instrument panel (see
page 40).
While driving, it indicates a
high temperature in the exhaust
system (see page. 127).
Indicates temporary
malfunctioning of the electronic
differential (see page 129).
If on, it indicates that all the
direction indicators are on at the
same time.