Table of Contents
Advertisement
Once the function has been selected, the individual subfunctions or
parameters that can be activated are displayed. To select them, use
the UP and DOWN buttons and press and quickly release the OK
(or RIGHT) button to activate a subsection or activate the selected
parameter.
To go back to a previous level in the menu hold down the OK
button, press the LEFT button or select the BACK item which is
normally in the list of subfunctions. If no operation is performed
for at least 10 seconds, the first menu level reappears on the
display.
Adjusting brightness
The brightness of the two TFT displays on the instrument panel
can be adjusted by selecting the special item on the MENU screen
page or by using directly the UP and DOWN buttons when the
MENU screen page is not displayed and when the chronometer is
off if the Chronometer screen page is displayed.
The first time one of the two buttons is pressed, the screen page
is displayed. The next time the buttons are pressed, the brightness
can be adjusted.
The adjustment made, which can be activated even when the
vehicle is moving, can be seen immediately and does not affect the
brightness of the warning lights on the panel.
The screen page disappears when the OK button is pressed or
automatically if it is not used for 5 seconds and is replaced by the
screen page that was previously displayed.
DIMMING
About your Vehicle
4
99
Advertisement
Table of Contents
