Multi-Function Display - Ferrari F430 Spider Owner's Manual

Multi-function display

9 - Multi-function display
Incorporated in the instrument panel, it
is designed to diagnose and signal any
applicable; it may have the following colors:
Green = Normal driving conditions
Red = When a fault occurs
Amber = When one of the systems has been
activated
Multi-function display signals
The multi-function display shows symbols
relative to fault conditions and the state of
the vehicle.
If multiple faults occur at the same time, they
are displayed for a period of time depending
on their priority.
The signals of the tire pressure monitoring
system (optional) that may appear on the
multi-function display are described on
146.
The following symbols may be displayed:
Check OK
When the ignition key is turned
to position II, the electronic
system runs a diagnostic check
of the vehicle and, if no faults are
found, the symbol "Check OK"
illuminates to indicate that the
vehicle can be started.
40
Fuel door open
Indicates that the fuel door is
open or not properly closed.
Outside temperature
If selected with the relevant
button, it displays the outside
temperature.
Clock
Displays the time. It can be
disabled with the multi-function
button (see
If the battery is removed, the time will have
to be reset using the multi-function buttons
(see page 46).
CST active
While driving, it indicates that
page
the CST has been activated.
CST inactive
Indicates a malfunction or
that the CST system has been
deactivated by the switch on the
steering wheel (see
Low fuel
Indicates that 4.76-5.28 US
Gallons (18-20 liters) of fuel
are left in the tank or that
the fuel level gauge may be
malfunctioning.
Fuel supply cut-off
Suspension system
Contact your Authorized Ferrari Dealer.
Instrument panel lighting
page 46).
Slow Down
Contact your Authorized Ferrari Dealer.
page 30).
Hazard warning lights
Indicates that the inertia switch
has tripped, in the event of an
accident, and that consequently
the fuel supply has been cut off.
While driving, it indicates a
malfunction in the suspension
system.
If selected with the relevant
button, it adjusts the brightness
level of the instrument panel (see
page 46).
While driving, it indicates a
high temperature in the exhaust
system (see page 135).
Indicates a temporary
malfunctioning of the electronic
differential (see page 137).
If on, it indicates that the hazard
warning lights are on.