Table of Contents
Advertisement
Seat belts
Warning
The seat belts must be properly adjusted and fastened at all
times.
Correct use of the seat belts can reduce the risk of serious injury
in the event of an accident or if the vehicle overturns.
Fastening the seat belts
After positioning the seat correctly:
• Grip the latch plate A, slowly pull the belt and insert the latch
plate into the buckle
B
(if the belt locks while you are pulling it
out, let it wind back a little and pull it out again without jerking
it).
• Make sure that it has clicked into the locked position: hold the
belt and pull it to check that the latch plate has been inserted
correctly.
• Position the seat belt correctly.
�
�
Quick reference guide
42
If the driver's seat belt is not fastened, when you turn the ignition
key to position II, the warning light on the instrument panel
illuminates and remains lit as long as the seat belt is not fastened.
Unfastening the seat belts
• Push the release button E.
• Guide the latch plate
Warning
Do not allow children to be held on a passenger's lap using only
one seat belt for both of them.
For further information, refer to the "Safety" chapter on page 56.
A
E
A
back to its rest position.
Advertisement
Table of Contents
