Table of Contents
Advertisement
1.4 Board Components
Figure 1-1 shows the major components on the adapter. The following table
describes these components.
No.
Components
1
fiber connectors
2
Link LED
3
Act. LED
4
FDX LED
U3
5
JP1
6
Description
The connectors require fiber cable for 100
Mbps connection.
This LED lights when the connection is
established.
This LED lights when network data is
transmitted or received.
This LED indicates full duplex operation is in
process.
Remote boot ROM socket
3-Pin Wake on LAN (WOL) connector
Figure 1-1 Board Components
Advertisement
Table of Contents
