Installing The Adapter - KTI Networks KF-221FX series Installation Manual

2. Installing the Adapter

This chapter describes how to install the Fast Ethernet PCI adapter in a PCI
computer and how to connect the adapter to the network. Before installing the
adapter, you need the following:
 A computer system that is compliant with the PCI specifications version 2.1 or
later.
 An available PCI bus master slot in the computer
 A Wake on LAN cable (supplied with the adapter)
 The adapter driver diskettes (or CD supplied with the adapter)
 A fiber cable
2.1 Installing the Adapter
To install the adapter in your computer, follow these steps:
1. Turn off the power to the computer and disconnect all cables connected to the
computer.
2. Remove the computer's cover.
3. Unscrew and remove the slot cover from the PCI bus slot that you plan to use.
4. Install optional Boot ROM, if you want to use the remote boot ROM function.
Refer to Appendix for more information.
5. Insert the adapter into the slot and secure the screw.
6. Configure WOL, if required. Refer to 2.2 for the details.
7. Replace the computer cover and reconnect all previously connected cables.
Inserting the Adapter into the PCI Slot