Table of Contents
Advertisement
Appendix
A.1 Installing Remote Boot ROM
Before you can use the remote boot function, you have to setup the remote boot
service on the file server and install the remote boot ROM onto the adapter.
The remote boot ROM is optional and must be purchased sepa-rately. The adapter
boot ROM supports both PXE and RPL proto-cols at the same time. Consult your
dealer for the availability.
To install the boot ROM, make sure the notch of the boot ROM is in the same
direction as the notch of the socket on the adapter. The remote boot ROM socket is
labeled U3 on the adapter.
After installation, use RSET8139 utility program provided in the driver diskette to
enable boot ROM function.
To setup remote boot services in different operation systems, refer to the associated
operation manual of each network operation system.
-17-
Advertisement
Table of Contents
