Lowrance XOG Operation Instructions Manual page 7

Map Mode
Section
2
addresses on-screen commands, power button, and creating
and saving contacts.
Power Button
The Power button turns the unit on and off
and controls the map screen's backlight.
The unit has three preset backlight levels.
Repeatedly pressing
POWER
will cycle
through the backlight settings. To turn the
unit off, press and hold the
POWER
key.
Touch Screen
The touch screen is used to enter commands. On-screen toolbars,
menus and text lists are used to select entries and change features.
From time to time there may be a slight delay between pressing a
command and seeing the unit respond. The delay may be necessary
while the unit retrieves information from the hard drive. Close menus
and dialogs by pressing
X
in the top right corner of the screen.
Use an optional microfiber towel to clean the unit's screen. DO NOT
use cleaning chemicals on the screen or damage may occur. Cleaning
fabrics other than a microfiber towel may scratch the screen. Damage
caused by incorrect cleaning is not covered by the warranty. To check
the availability of optional accessories go to our web site at
www.lei-
extras.com.
7