Lowrance XOG Operation Instructions Manual page 46

Straight-line Navigation Commands
The two basic commands used for straight-line navigation are Go
To
Cursor
and Go
To Waypoint.
Go To Cursor will navigate to any spot,
landscape feature or waypoint selected on-screen using the cursor. The
Go To Waypoint command works with the Address Book feature.
Create Waypoint at Current Position
Press the
LOCATION-POI INFORMATION
button on the map screen and the
Waypoint Information screen will appear. Select
ADD TO ADDRESSBOOK
to
save the waypoint. The Edit Contact screen appears. You can accept
the default name and symbol or edit it.
N 36008.971'
U 95°50.579'
Altitude:
roo
ft
9/28/07 12:59:26 PM
Distance: 0.00
mi
Bearing:
85°
true
Waypoint Information screen, at left. The Edit Contact screen for this
waypoint is shown at right. To change the waypoint name, symbol or
any other information in the Edit Contact screen, touch anywhere in-
side the relevant box and a keyboard will appear.
Create Waypoint with Cursor
Use the cursor to select a location on-screen. Press the
LOCATION-POI IN-
46