U N I Q U E S E R V I C E P R O C E D U R E S
TURBO MOUNTING
PEDESTAL
INTAKE PORTS
INTAKE PORTS
GASKET LOCATING TAB
GASKET LOCATING TAB
TOOL #303 769
TOOL #303 769
TURBO OIL DRAIN
TUBE
149
150
151
Turbocharger Oil Drain Tube:
Removal
• The turbocharger oil drain is located under
the turbocharger and is sealed with o-rings.
• To remove the drain tube pull it forward, out
of the high pressure pump cover.
Intake Manifold
• When reinstalling the intake manifold, the
locating tabs on the intake manifold gasket
should face up and toward the center of the
engine.
• There is a port on the intake manifold for
cooling system deaeration that returns to the
coolant reservoir.
IPR Valve: Removal
• To remove the IPR valve use the IPR socket
tool #303-769 and turn counterclockwise.
• Note: The connector for the IPR might hit
the cylinder head. If this occurs the coil
body can be repositioned on the valve.
75