6 . 0 L P O W E R S T R O K E F E AT U R E S
Rocker Carrier
• The aluminum rocker arm carrier is mounted
on top of the cylinder head and is held in
place by the cylinder head bolts.
• The rocker arm carrier provides the
mounting location for all of the rocker
fulcrums.
• The carrier also provides the connector pass
through for the injector and glow plug.
Cylinder Head
• The 6.0L POWER STROKE uses a four (4)
valve per cylinder head design to increase
air flow and efficiency.
• For identification, the exhaust valves are
smaller than the intake valves.
Rear Geartrain
• The geartrain for the crankshaft, camshaft,
and high pressure pump are located in the
rear of the engine under the rear cover.
• This allows the high pressure pump to be
mounted inside the engine and also reduces
geartrain noise.
14
CONNECTOR PASS THROUGH
CONNECTOR PASS THROUGH
CYLINDER HEAD BOLTS
CYLINDER HEAD BOLTS
INTAKE VALVES
EXHAUST VALVES
HIGH PRESSURE PUMP GEAR
HIGH PRESSURE PUMP GEAR
CAMSHAFT GEAR
CRANKSHAFT GEAR
ROCKER ARMS
ROCKER ARMS
INJECTOR NOZZLE
GLOW PLUG
19
20
21