AS SE M BLY S T EP
E800 SHOWN
A) Open HARDWARE BAG FOR STEP 6.
B) Place WASHER (F) over the LINK ARM axle.
C) Slide LINK ARM into PEDAL ARM.
D) Attach FOOTPAD BRACKET to the LINK ARM with 3 SCREWS (G).
E) Repeat on other side.
A) M5x20mm Screw
quantity:4
SCREW (E)
B) M5x15mm Screw
20 mm
quantity:8
12
Qty: 4
PEDAL ARM
SCREW (G)
HARDWARE BAG FOR STEP CONTENTS :
C) 29mm wave washer
quantity: 2
SCREW (F)
15 mm
D) M8x15mm Screw
Qty: 8
quantity:6
FOOTPAD BRACKET
WASHER (F)
WAVE WASHER (F)
20 mm
Qty: 2
LINK ARM
FOOTPAD
SCREW (G)
15 mm
Qty: 6