Recording Paper - Panasonic KX-FLB881 Operating Instructions Manual

2. Slide the other tab (1) into the right hole (2) of the
extender from below until it clicks into place.
If the extender is detached
1. Line up the extender (1) underneath the output tray
(2), and insert the left side of the extender into the
output tray.
2. Attach the extender (1) by bending the side of the
output tray downward slightly and pressing the right
side of the extender.
2
1
1
2
1
For assistance, please visit http://www.panasonic.com/help
1. Introduction and Installation

1.8 Recording paper

The paper input tray unit can hold:
– Up to 250 sheets of 60 g/m
lb.) paper.
– Up to 230 sheets of 80 g/m
– Up to 200 sheets of 90 g/m
L Please refer to page 89 for information on recording
paper.
L The unit is set for printing letter size paper by
default. If you want to use A4 or legal size paper,
change the setting (feature #380 on page 52).
1
Pull the paper input tray (1) completely out.
1
2
Pinch the front side of the recording paper guide
(1), then slide it to match the paper size mark.
Pinch both sides of the recording paper guides (2),
then slide them to match the paper size mark.
LGL
LTR A4
2
1
2 2
to 75 g/m (16 lb. to 20
2
(21 lb.) paper.
2
(24 lb.) paper.
LGL
A4 LTR
2
13