Table of Contents
Advertisement
Adjusting the Pedal Sensitivity
(CALIB)
Here's how to calibrate the sensitivity of the pedal.
1. Press the [EDIT] button to access the EDIT screen .
2. Use the PAGE [ ] [ ] buttons to select the SYSTEM tab .
3. Use the cursor [ ] [ ] buttons to select the BACKUP/INIT
icon, and press the [ENTER] button .
4. Use the cursor [ ] [ ] buttons to select the PEDAL CALIB
icon, and press the [ENTER] button .
The PEDAL CALIBRATION screen will appear.
5. Move the expression pedal to the heel-down position, and
press the [ENTER] button .
The display will indicate "OK, " and then the following screen will
appear.
6. Move the expression pedal to the fully depressed (toe down)
position, and press the [ENTER] button .
The display will indicate "OK, " and then the following screen will
appear.
7. Apply strong pressure to the toe area of the expression pedal .
Verify that the EXP PEDAL SW indicator lights when you apply pressure
to the toe area. If you want to change the sensitivity at which the EXP
PEDAL SW indicator lights, adjust the THRESHOLD setting.
8. When you've finished making calibration settings, press the
[ENTER] button .
The screen will indicate "COMPLETE!"
Settings for the Entire GR-55 (SYSTEM)
Restoring the Factory Settings
(FACTORY RESET)
Here's how the settings stored in the GR-55 can be returned to their
factory-set condition.
NOTE!
If important data you've created has been stored in the GR-55, be
aware that the data you've edited or created will all be lost if you
execute a factory reset. If you want to keep this data, you must save
it to USB memory (p. 72).
* The pedal calibration settings will not be reset .
1. Press the [EDIT] button to access the EDIT screen .
2. Use the PAGE [ ] [ ] buttons to select the SYSTEM tab .
3. Use the cursor [ ] [ ] buttons to select the BACKUP/INIT
icon, and press the [ENTER] button .
4. Use the cursor [ ] [ ] buttons to select the FACTORY RESET
icon, and press the [ENTER] button .
5. Use the cursor [ ] [ ] buttons to select "OK," and press the
[ENTER] button .
The factory reset will be executed.
* Never turn off the power while the factory reset is being carried out .
6. When the following screen appears, turn off the power .
The next time you power up the GR-55, it will start up in the factory-set
condition.
NOTE!
If the GR-55 is set to "BASS MODE, " it will return to "GUITAR MODE"
(p. 9).
73
Advertisement
Table of Contents
