Roland GR-55 Owner's Manual page 49

11: SPACE-D
This is a multiple chorus that applies two-phase modulation in stereo. It gives no
impression of modulation, but produces a transparent chorus effect.
Balance D
L in
Space D
Space D
R in
Balance D
Parameter Value
PRE DELAY
0.0–100 msec
RATE #
0–100, BPM –
DEPTH # 0–100
PHASE 0–180 deg
LOW GAIN
-15–+15 dB
HIGH GAIN -15–+15 dB
BALANCE # D100:0W–D0:100W
LEVEL 0–100
12: FLANGER
This is a stereo flanger.
It produces a metallic resonance that's comparable to the sound a jet plane makes
when ascending/descending. A filter is provided so that you can adjust the timbre of
the flanged sound.
Balance D
L in
Flanger
Feedback
Feedback
Flanger
R in
Balance D
Parameter Value
Selects the type of filter.
OFF
FILTER TYPE
LPF
HPF
CUTOFF FREQ 200–8000 Hz
PRE DELAY 0.0–100 msec
RATE #
0–100, BPM –
DEPTH #
0–100
PHASE 0–180 deg
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
Description
Adjusts the delay time from the
direct sound until the chorus
sound is heard.
Adjusts the rate of the
modulation.
Adjusts the depth of the
modulation.
Adjusts the spatial spread of the
sound.
Adjusts the gain of the low range.
Adjusts the gain of the high
range.
Adjusts the volume balance
between the direct sound (D)
and the chorus sound (W).
Adjusts the output volume.
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
Description
No filter is used.
Cuts the frequency range above
the CUTOFF FREQ.
Cuts the frequency range below
the CUTOFF FREQ.
Adjusts the center frequency
when using the filter to cut a
specific frequency range.
Adjusts the delay time from
when the direct sound begins
until the flanger sound is heard.
Adjusts the rate of the
modulation.
Adjusts the depth of the
modulation.
Adjusts the spatial spread of the
sound.
Parameter Value
FEEDBACK # -98–+98%
LOW GAIN -15–+15 dB
HIGH GAIN -15–+15 dB
BALANCE # D100:0W–D0:100W
LEVEL
0–100
13: STEP FLANGER
This is a flanger in which the flanger pitch changes in steps. The speed at which the
pitch changes can also be specified in terms of a note-value of a specified tempo.
Balance D
L in
Step Flanger
Feedback
Feedback
Step Flanger
R in
Balance D
Parameter Value
Selects the type of filter.
OFF
FILTER TYPE
LPF
HPF
CUTOFF FREQ 200–8000 Hz
PRE DELAY 0.0–100 msec
RATE #
0–100, BPM –
DEPTH 0–100
PHASE
0–180 deg
FEEDBACK #
-98–+98%
STEP RATE #
0–100, BPM –
LOW GAIN -15–+15 dB
HIGH GAIN -15–+15 dB
BALANCE #
D100:0W–D0:100W
LEVEL 0–100
Effect Settings (EFFECT)
Description
Adjusts the proportion of the
flanger sound that is fed back
into the effect. Negative (-)
settings will invert the phase.
Adjusts the gain of the low range.
Adjusts the gain of the high
range.
Adjusts the volume balance
between the direct sound (D)
and the chorus sound (W).
Adjusts the output volume.
2-Band
L out
EQ
Balance W
Balance W
2-Band
R out
EQ
Description
No filter is used.
Cuts the frequency range above
the CUTOFF FREQ.
Cuts the frequency range below
the CUTOFF FREQ.
Adjusts the center frequency
when using the filter to cut a
specific frequency range.
Adjusts the delay time from
when the direct sound begins
until the flanger sound is heard.
Adjusts the rate of the
modulation.
Adjusts the depth of the
modulation.
Adjusts the spatial spread of the
sound.
Adjusts the proportion of the
flanger sound that is fed back
into the effect. Negative (-)
settings will invert the phase.
Adjusts the rate (period) of pitch
change.
Adjusts the gain of the low range.
Adjusts the gain of the high
range.
Adjusts the volume balance
between the direct sound (D)
and the chorus sound (W).
Adjusts the output volume.
49