Table of Contents
Advertisement
Effect Settings (EFFECT)
08: SLICER
By applying successive cuts to the sound, this effect turns a conventional sound into a
sound that appears to be played as a backing phrase. This is especially effective when
applied to sustain-type sounds.
L in
Slicer
R in
Slicer
Parameter
Value
PATTERN #
P01–P20
RATE #
0–100, BPM –
ATTACK #
0–100
INPUT SYNC SW
OFF, ON
INPUT SYNC
0–100
THRESHOLD
LEVEL
0–100
09: VK ROTARY
This type provides modified response for the rotary speaker, with the low end boosted
further.
This effect features the same specifications as Roland VK-7 organ's built-in rotary
speaker.
L in
Rotary
R in
Parameter
Value
This sets the rotational speed of the rotating speaker.
SPEED
SLOW
FAST
BRAKE
OFF, ON
WOOFER SLOW
0–100
SPEED #
WOOFER FAST
0–100
SPEED #
WOOFER TRANS UP
0–100
WOOFER TRANS
0–100
DOWN
WOOFER LEVEL
0–100
TWEETER SLOW
0–100
SPEED #
TWEETER FAST
0–100
SPEED #
TWEETER TRANS UP
0–100
TWEETER TRANS
0–100
DOWN
TWEETER LEVEL
0–100
48
L out
R out
Description
Selects the slice pattern used to
cut the sound.
Specifies the rate at which the
16-step sequence will repeat.
Adjusts the speed at which the
level changes between steps.
Specifies whether an input
note will cause the sequence to
resume from the first step of the
sequence (ON) or not (OFF).
Adjusts the volume at which an
input note will be detected.
Adjusts the output volume.
2-Band EQ
L out
R out
2-Band EQ
Description
Slow
Fast
Switches the rotation of the
rotary speaker.
When this is turned on, the
rotation will gradually stop. When
it is turned off, the rotation will
gradually resume.
Adjusts the low-speed rotation
speed of the woofer.
Adjusts the high-speed rotation
speed of the woofer.
Adjusts the rate at which the
woofer rotation speeds up when
the rotation is switched from
SLOW to FAST.
Adjusts the rate at which the
woofer rotation speeds up when
the rotation is switched from
FAST to SLOW.
Adjusts the volume of the woofer.
These are the settings of the
tweeter. The parameters are the
same as for the woofer.
Parameter
Value
SPREAD
0–10
LOW GAIN
-15–+15 dB
HIGH GAIN
-15–+15 dB
LEVEL
0–100
10: HEXA-CHORUS
This type uses a six-phase chorus (six layers of chorused sound) to give richness and
spatial spread to the sound.
L in
Balance D
Hexa Chorus
R in
Balance D
Parameter
Value
PRE DELAY
0.0–100 msec
RATE #
0–100, BPM –
DEPTH #
0–100
PRE DELAY
0–20
DEVIATION
DEPTH DEVIATION
-20–+20
PAN DEVIATION
0–20
BALANCE #
D100:0W–D0:100W
LEVEL
0–100
Description
Specifies how the sound of the
rotary speaker will be spread.
Adjusts the gain of the low range.
Adjusts the gain of the high
range.
Adjusts the output volume.
L out
Balance W
Balance W
R out
Description
Adjusts the delay time from the
direct sound until the chorus
sound is heard.
Adjusts the rate of the
modulation.
Adjusts the depth of modulation.
Adjusts the deviation with
respect to the sounding of the
various chorus sounds.
Adjusts the difference in
modulation depth between each
chorus sound.
Adjusts the difference in stereo
location between each chorus
sound.
With a setting of "0, " all of the
sounds will be panned to the
center. With a setting of "20, " each
of the chorused sounds will be
spread apart at 60 degree angles
relative to the center.
Adjusts the volume balance
between the direct sound (D)
and the chorus sound (W).
Adjusts the output volume.
Advertisement
Table of Contents
