Miele WT 2780 WPM Operating Instructions Manual page 22

Hide thumbs Also See for WT 2780 WPM:
Table of Contents

Advertisement

WASHING
F Add detergent
The detergent dispenser display will
now appear.
Detergent
7
The percentage shown relates to the
amount of detergent recommended by
the manufacturer on the packaging.
40%
Add slightly less than half the
recommended amount . . .
50%
Add half the recommended
amount . . .
60%
Add slightly more than half the
recommended amount . . .
75%
Add three quarters of the
recommended amount . . .
100%
Add the recommended amount
You also need to take the level of
soiling and water hardness into
account.
Too little detergent results in:
– Laundry not getting properly clean
and with time it may become grey
and hard to the touch.
– Greasy particles clinging to laundry.
– Limescale deposits on the heater
elements.
Too much detergent results in:
– Excessive foam which causes a low
level of agitation and poor wash,
rinse and spin results.
22
100%
– High water consumption (an
additional rinse cycle will
automatically switch in).
– A burden to the environment.
^ Pull out the detergent drawer and
add detergent to the compartments
as follows:
i = Detergent for the pre-wash
1
(
/
of the total amount
3
recommended).
j = Detergent for the main wash
including Soak, if selected
§
= Fabric conditioner or liquid
starch
^ Close the detergent drawer.
See "Detergent" for further information.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents