Washing And Drying Environmentally And Economically - Miele WT 2780 WPM Operating Instructions Manual

Washing and drying environmentally and economically

Energy and water consumption
– Water consumption and energy
usage are determined by the size of
the load.
To make the most out of your
machine, load the maximum amount
for the programme you are using.
– Use the Automatic plus and Express
20 programmes for small loads.
– When smaller amounts of laundry are
washed using the Cottons
programmes, the automatic load
recognition system will reduce the
amount of water, time and energy
used. This may mean that the time
left shown in the display is adjusted
during the course of the wash
programme.
– Using the Cottons 60°C programme
instead of the Cottons 95°C
programme will result in energy
savings of between 35% and 45%.
This is sufficient for most levels of
soiling. For stubborn or old soiling,
use the Soak Extra option.
– Using the Cottons 40°C programme
is recommended for a normally
soiled load and is the programme
used in energy/water consumption
tests to AS/NZS 2040 (Refer to
consumption data).
18
Detergent
– Do not exceed the amounts of
detergent recommended by the
manufacturer on the packaging.
– Reduce the amount of detergent for
smaller loads. Use the Load % /
Detergent % button.
Choosing the correct Extra option
(Pre-wash, Soak, Short)
Select:
– A wash programme together with the
Short Extra option for light to normal
soiling where there are no obvious
marks.
– A wash programme without any Extra
options for normal to heavy soiling.
– A wash programme together with the
Soak Extra option for very heavily
soiled laundry.
– The Pre-wash Extra option for
laundry with large amounts of dirt
(e.g. dust, sand).
When drying straight after washing
Select a high spin speed for the wash
programme, as well as for the
Thermospin to save time and energy.