Unified Access Point Administrator's Guide
Section 7 - Maintaining the Access Point
This section describes how to maintain the UAP.
From the UAP Administrator UI, you can perform the following maintenance tasks:
Saving the Current Configuration to a Backup File
The AP configuration file is in XML format and contains all of the information about the AP settings. You can download
the configuration file to a management station to manually edit the content or to save as a back-up copy.
You can use HTTP or TFTP to transfer files to and from the UAP. After you download a configuration file to the
management station, you can manually edit the file, which is in XML format. Then, you can upload the edited
configuration file to apply those configuration settings to the AP.
Use the following steps to save a copy of the current settings on an AP to a backup configuration file by using TFTP:
1.) Select TFTP for Download Method.
2.) Enter a name (1 to 63 characters) for the backup file in the Configuration File field, including the .xml file name
extension and the path to the directory where you want to save the file.
3.) Enter the Server IP address of the TFTP server.
4.) Click Download to save a copy of the file to the TFTP server.
Use the following steps to save a copy of the current settings on an AP to a backup configuration file by using HTTP:
1.) Select HTTP for Download Method.
2.) Click the Download button.
A dialog box displays verifying the download.
January 2015
Figure 44 - Manage this Access Point's Configuration - Save (TFTP)
Figure 45 - Manage this Access Point's Configuration - Save (HTTP)
Section 7 - Maintaining the Access Point
Page 79