Configuring Client Qos; Configuring Qos By Using The Web Interface; Figure 74 - Configuring Qos By Using The Web Interface (Acl Name); Figure 75 - Configuring Qos By Using The Web Interface (Rule1) - D-Link DWL-2600AP Administrator's Manual

Unified Access Point Administrator's Guide

Configuring Client QoS

This example shows how to enable client QoS, configure an ACL and a DiffServ policy on the AP, and to apply the
ACL and the Policy to traffic transmitted from clients associated with VAP 2 and received by the AP.
The IPv4 ACL is named acl1 and contains two rules. The first rule allows HTTP traffic from the 192.168.1.0 subnet.
The second rule allows all IP traffic from the management station (192.168.1.23). All other traffic is denied due to the
implicit deny all rule at the end of the ACL. The ACL is applied to the inbound interface on the AP so that packets are
checked when the AP receives traffic from associated clients.
The DiffServ policy in this example shows how to establish default DiffServ behavior for clients associating with the
VAP that do not obtain a DiffServ policy name through the RADIUS server. Voice traffic (UDP packets) received from
clients in the 192.168.1.0 subnet that has the VoIP server as its destination address (192.168.2.200), is marked with
the IP DSCP value for expedited forwarding so that it takes priority over other traffic.

Configuring QoS by Using the Web Interface

ACL Configuration
1.) Log onto the AP and navigate to the Client QoS > Client QoS ACL page.
2.) Enter acl1in the ACL Name field, and click Add ACL.
The screen refreshes, and additional fields appear.
3.) From the Action menu, select Permit.
4.) Clear the Match Every option.
5.) Verify that the Protocol option is selected and IP is selected from the Select From List menu.
6.) Configure the remaining settings:
•) Source IP Address: 192.168.1.0
January 2015

Figure 74 - Configuring QoS by Using the Web Interface (ACL Name)

Figure 75 - Configuring QoS by Using the Web Interface (Rule1)

Appendix B - Configuration Examples
Unified Access Point Administrator's Guide
Page 121