Storing And Handling The Cartridge Before Unpacking; Storing Or Handling The Cartridge After Unpacking - Canon MF6500 Series Service Manual

Canon mf6500 series laser multifunction printer
Hide thumbs Also See for MF6500 Series:
Table of Contents

Advertisement

Chapter 1

1.2.5.7 Storing and Handling the Cartridge Before Unpacking

LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL
Whether it is left packed or unpacked, or is fitted to the machine, the cartridge is subject to the effects of the environment, and will deteriorate over time. The speed
of deterioration depends on the site or storage condition, and cannot be generalized. Take full care when
storing or handing it.
If the cartridge is to be stored in a storeroom or a workshop, be sure to refer to table, and keep the following in mind:
- Avoid direct sunshine.
- Avoid vibration.
- Avoid impact. (Take care not to drop it.)
Temperature
Change in temperature (within about 3 min)
Humidity
Atmospheric pressure
Effective period

1.2.5.8 Storing or Handling the Cartridge After Unpacking

LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL
The photosensitive medium is made of organic photo-conducting material (OPC), and will deteriorate if exposed to strong light. It is also used to hold toner inside
it. Be sure to advise the user to be fully careful when storing and handling the cartridge. (The cartridge must always be put inside a protective bag for storage.)
a. Use a protective bag for storage.
b. Avoid areas subject to direct sunshine (e.g., near a window). Do not leave it alone inside a card, as the temperature can rise to an extremely high level. (These
are also true even if the cartridge is put in a protective bag.)
c. Avoid areas subject to high temperature/humidity or low temperature/humidity, areas subject to rapid changes in temperature or humidity, or areas subject to
condensation (e.g., near an air conditioner).
d. Avoid areas exposed to corrosive gas (e.g., insecticide) or salty air.
e. Avoid areas subject to dust, ammonium gas, or organic solvent gas.
f. Avoid areas near a CRT display, disk drive, and floppy disk. (The magnetism from the cartridge can destroy the data.)
g. Keep it out of reach of children.
h. Keep the temperature between 0 and 35 deg C.
1-16
Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com
Normal (9/10 of total storage period)
Severe (1/10 of total storage time)
Normal (9/10 of total storage period)
Severe (1/10 of total storage time)
T-1-6
0 to 35 deg C
High
35 to 40 deg C
Low
-20 to 0 deg C
40 to 15 deg C
-20 to 25 deg C
35 to 85 %RH
High
85 to 95 %RH
Low
10 to 35 %RH
0.6 to 1.01hpa
2.5 yr (approx.)
0011-5778
0011-5779

Advertisement

Table of Contents
loading

Table of Contents