Service Error Code - Canon MF6500 Series Service Manual

No. Tx/Rx
#0018 [Tx/Rx]
#0037 [Rx]
#0059 [Tx]
#0995/0099 [Tx/Rx]

13.3.3 Service Error Code

13.3.3.1 Service Error Code
LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL
No. Tx/Rx
##0100 [Tx]
##0101 [Tx/Rx]
##0102 [Tx]
##0103 [Rx]
##0104 [Tx]
##0106 [Rx]
##0107 [Rx]
##0109 [Tx]
##0111 [Tx/Rx]
##0114 [Rx]
##0200 [Rx]
##0201 [Tx/Rx]
##0220 [Tx/Rx]
##0232 [Tx]
##0237 [Rx]
##0261 [Tx/Rx]
##0280 [Tx]
##0281 [Tx]
##0282 [Tx]
##0283 [Tx]
##0284 [Tx]
##0285 [Tx]
##0286 [Tx]
##0287 [Tx]
##0288 [Tx]
##0289 [Tx]
##0290 [Tx]
##0670 [Tx]
##0671 [Rx]
##0672 [Tx]
##0673 [Rx]
##0674 [Tx]
##0675 [Rx]
##0750 [Tx]
##0752 [Tx]
##0753 [Tx]
##0754 [Tx]
##0755 [Tx]
##0757 [Tx]
##0758 [Tx]
##0759 [Tx]
##0760 [Tx]
##0762 [Tx]
##0763 [Tx]
Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com
Description
auto call initiation has failed.
image memory overflow at time of reception has occurred.
The number you dial and connected number (CSI) does not match.
a memory communication reservation has been cancelled.
Description
at time of transmission, the procedural signal has been transmitted more than specified.
the modem speed does not match that of the other party.
at time of transmission, fall-back cannot be used.
at time of reception, EOL cannot be detected for 5 sec (15 sec if CBT).
at time of transmission, RTN or PIN is received.
at time of reception, the procedural signal is received for 6 sec while in wait for the signal.
at time of reception, the transmitting party cannot use fall-back.
at time of transmission, a signal other than DIS, DTC, FTT, CFR, or CRP is received, and the procedural signal has been
sent more than specified.
memory error has occurred.
at time of reception, RTN is transmitted.
at time of reception, no image carrier is detected for 5 sec.
DCN is received outside the normal parity procedure.
system error (main program out of control) has occurred.
encoding error has occurred.
decoding error has occurred.
system error has occurred.
at time of transmission, the procedural signal has been transmitted more than specified.
at time of transmission, the procedural signal has been transmitted more than specified.
at time of transmission, the procedural signal has been transmitted more than specified.
at time of transmission, the procedural signal has been transmitted more than specified.
at time of transmission, DCN is received after transmission of TCF.
at time of transmission, DCN is received after transmission of EOP.
at time of transmission, DCN is received after transmission of EOM.
at time of transmission DCN is received after transmission of MPS.
after transmission of EOP, a signal other than PIN, PIP, MCF, RTP, or RTN has been received.
after transmission of EOM, a signal other than PIN, PIP, MCF, RTP, or RTN has been received.
after transmission of MPS, a signal other than PIN, PIP, MCF, RTP, or RTN has been received.
at time of V.8 late start, the V.8 ability of DIS front the receiving party is expected to be detected, and the CI signal is
expected to be transmitted in response; however, the procedure fails to advance, and the line is released because of T1 time-
out.
at time of V.8 arrival, procedure fails to move to phase 2 after detection
and releasing line
at time of V.34 transmission, a shift in procedure from phase 2 to phase 3 and thereafter stops, causing the machine to release
the line and suffer T1 timeout.
at time of V.34 reception, a shift in procedure from phase 2 to phase 3 and thereafter stops, causing the machine to release
the line and suffer T1 timeout.
at time of V.34 transmission, a shift in procedure from phase 3 and phase 4 to the control channel and thereafter stops,
causing the machine to release the line and suffer T1 timeout.
at time of V.34 reception, a shift in procedure from phase 3 and phase 4 to the control channel and thereafter stops, causing
the machine to release the line and suffer T1 timeout.
at time of ECM transmission, no meaningful signal is received after transmission of PPS-NULL, causing the procedural
signal to be transmitted more than specified.
at time of ECM transmission, DCN is received after transmission of PPS-NULL.
at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of PPS-
NULL, or T5 time-out (60 sec) has occurred.
at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of PPS-
NULL.
at time of ECM transmission, no meaningful signal is received after transmission of PPS-MPS, causing the procedural signal
to be transmitted more than specified.
at time of ECM transmission, DCN is received after retransmission of PPS-MPS.
at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of PPS-MPS,
or T5 time-out (60 sec) has occurred.
at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of PPS-MPS.
at time of ECM transmission, no meaningful signal is received after transmission of PPS-EOM, causing the procedural
signal to be transmitted more than specified.
at time of ECM transmission, DCN is received after transmission of PPS-EOM.
at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of PPS-MPS,
or T5 time-out (60 sec) has occurred.
T-13-5
of CM signal from caller, causing T1 time-out
Chapter 13
0012-5782
13-3