Canon MF6500 Series Service Manual
  1. Manuals
  2. Brands
  3. Canon Manuals
  4. Printer
  5. imageCLASS MF6500 Series
  6. Service manual

Canon MF6500 Series Service Manual

Canon mf6500 series laser multifunction printer
Hide thumbs Also See for MF6500 Series:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Driver Manual, Advanced Manual

Service Manual

MF6500 Series
Feb 22 2006
Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com

Advertisement

Table of Contents
loading

Related Manuals for Canon MF6500 Series

Summary of Contents for Canon MF6500 Series

  • Page 1: Service Manual

    Service Manual MF6500 Series Feb 22 2006 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 2 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 3 Canon will release technical information as the need arises. In the event of major changes in the contents of this manual over a long or short period, Canon will issue a new edition of this manual.

  • Page 4: Symbols Used

    Introduction Symbols Used This documentation uses the following symbols to indicate special information: Symbol Description Indicates an item of a non-specific nature, possibly classified as Note, Caution, or Warning. Indicates an item requiring care to avoid electric shocks. Indicates an item requiring care to avoid combustion (fire). Indicates an item prohibiting disassembly to avoid electric shocks or problems.
  • Page 5 Introduction The following rules apply throughout this Service Manual: 1. Each chapter contains sections explaining the purpose of specific functions and the relationship between electrical and mechanical systems with refer- ence to the timing of operation. In the diagrams, represents the path of mechanical drive; where a signal name accompanies the symbol , the arrow indicates the direction of the electric signal.
  • Page 6 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...

  • Page 7: Table Of Contents

    Contents Contents Chapter 1 Introduction 1.1 System Construction ..........................1- 1 1.1.1 System Construction ............................... 1- 1 1.2 Product Specifications ..........................1- 2 1.2.1 Names of Parts................................ 1- 2 1.2.1.1 External View (Front) ................................1- 2 1.2.1.2 External View (Rear)................................1- 2 1.2.1.3 Cross-Section (Main body) ..............................
  • Page 8 Contents 2.1.9 Network PCB Åiif equipped with network functionsÅj .....................2- 4 2.1.10 NCU PCB (if equipped with fax functions) ......................2- 4 2.1.11 Modular Jack PCB (if equipped with fax functions)....................2- 4 2.2 Basic Sequence ............................2- 4 2.2.1 Basic Sequence ...............................2- 4 Chapter 3 Original Exposure System 3.1 Basic Constraction .............................
  • Page 9 Contents 4.4.4 Drive Unit................................. 4- 9 4.4.4.1 Removing the Drive Unit ................................4- 9 4.4.5 Pick-up/Feed Roller Unit............................4- 9 4.4.5.1 Removing the Pickup/Feed Roller Unit ............................ 4- 9 4.4.6 Pick-up Roller ................................4- 9 4.4.6.1 Removing the Pickup Roller..............................4- 9 4.4.7 Feed Roller ................................
  • Page 10 Contents 7.4 Duplex Unit ..............................7- 4 7.4.1 Outline..................................7- 4 7.5 Manual Feed Pickup Unit ........................... 7- 5 7.5.1 Outline..................................7- 5 7.5.2 Retry Pickup................................7- 5 7.5.3 Detecting the Size of Paper .............................7- 5 7.6 Parts Replacement Procedure ........................7- 6 7.6.1 Cassette Pickup Roller.............................7- 6 7.6.1.1 Removing the Cassette Pickup Roller .............................
  • Page 11 Contents 8.4.4 Fixing Delivery Paper Sensor ..........................8- 7 8.4.4.1 Removing the Delivery Sensor ..............................8- 7 8.4.5 Delivery Full Sensor ..............................8- 7 8.4.5.1 Removing the Delivery Full Sensor............................8- 7 Chapter 9 External and Controls 9.1 Control Panel ..............................9- 1 9.1.1 Outline ..................................
  • Page 12 Contents 10.2 Consumables............................10- 1 10.2.1 Durables................................10- 1 10.3 Periodical Service ........................... 10- 1 10.3.1 Periodeical Service Items.............................10- 1 Chapter 11 Measurement and Adjustments 11.1 Scanning System............................ 11- 1 11.1.1 Procedure after Replacing the CS ........................11- 1 11.2 Fixing System ............................11- 1 11.2.1 ï¾çsê´ÇÃíðêÆ..............................11- 1 11.3 Electrical Adjustments ..........................
  • Page 13 Contents Chapter 14 Service Mode 14.1 Service Soft Switch Settings (SSSW) .....................14- 1 14.1.1 SSSW-SW01: ..............................14- 1 14.1.1.1 List of Functions ................................... 14- 1 14.1.1.2 Detailed Discussions of Bit 0..............................14- 1 14.1.2 SSSW-SW03 ............................... 14- 1 14.1.2.1 List of Functions ................................... 14- 1 14.1.2.2 Detailed Discussions of Bit 7..............................
  • Page 14 Contents pseudo RBT signal pattern OFF time length (long)> ....................14- 7 14.3.10 <020: pseudo CI signal pattern ON time length><021: pseudo CI signal pattern OFF time length (short)><022: pseudo CI signal pattern OFF time length (long)> .....................14- 7 14.3.11 <023: CNG detention level for fax/tel switchover> .....................14- 7 14.3.12 <024: pseudo RBT transmission level at time of fax/tel switchover>...
  • Page 15 Contents 14.7.5 Error Log List ..............................14- 16 14.7.6 Spec List ................................14- 18 14.7.7 Service Label ..............................14- 19 14.8 Download (DOWNLOAD) ........................14- 20 14.8.1 Download................................14- 20 14.9 Data Initialization Mode (CLEAR) ......................14- 20 14.9.1 Clear .................................. 14- 20 14.10 ROM Management (ROM) ........................14- 20 14.10.1 ROM display ..............................
  • Page 16 Contents Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...

  • Page 17: Chapter 1 Introduction

    Chapter 1 Introduction Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 18 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 19 Contents Contents 1.1 System Construction ..............................1-1 1.1.1 System Construction ..................................1-1 1.2 Product Specifications..............................1-2 1.2.1 Names of Parts ..................................... 1-2 1.2.1.1 External View (Front) .....................................1-2 1.2.1.2 External View (Rear) ......................................1-2 1.2.1.3 Cross-Section (Main body) .....................................1-3 1.2.1.4 Cross Section (ADF) .......................................1-3 1.2.2 Using the Machine ..................................
  • Page 20 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...

  • Page 21: System Construction

    Chapter 1 1.1 System Construction 1.1.1 System Construction 0011-4306 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL F-1-1 [1] Host machine [2] Cassette Unit-M1 [3] Hand Set CT-25 *1 *1 The handset comes standard with the imageCLASS MF6550 for China. It is optionally available for the Laser Base MF6550 for Europe and Laser Base MF6580PL.

  • Page 22: Product Specifications

    Chapter 1 1.2 Product Specifications 1.2.1 Names of Parts 1.2.1.1 External View (Front) 0011-3526 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL [8] [9] [10] [11] [12] F-1-2 T-1-1 Open/close cover Cassette Slide guide Left cover Document feeder tray...

  • Page 23: Cross-Section (Main Body)

    Chapter 1 Power socket Main power switch *1: If equipped with printer functions. *2: If equipped with fax functions. 1.2.1.3 Cross-Section (Main body) 0011-3528 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL [21] [20] [19]...
  • Page 24 Chapter 1 T-1-4 Registration roller Feed roller Separation pad Pickup roller Feed roller 1 Delivery roller Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...

  • Page 25: Using The Machine

    Chapter 1 1.2.2 Using the Machine 1.2.2.1 Turning On the Power Switch 0011-4257 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL The machine possesses 2 power switches: main power switch and control power switch. Normally (i.e., unless the machine is in a sleep state), the machine will be supplied with power when you turn on its main power switch.

  • Page 26: When Turning Off The Main Power Switch

    Chapter 1 1.2.2.2 When Turning Off the Main Power Switch 0011-4258 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL <During printing or fax data transmission/reception> Be sure to operate the main power switch while the Processing/Data lamp on the control panel is not lit. (Turning off the main switch during printing or fax data transmission/reception can erase the data being processed.) F-1-7 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 27 Chapter 1 <During downloading> Do not turn off the power switch or ON/OFF switch on the control panel. (Turning off the main power switch during downloading can make this machine inoperative.) F-1-8 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...

  • Page 28: Control Panel

    Chapter 1 1.2.2.3 Control Panel 0011-4259 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL [10] [11] [12] [13] [14] [15] [16] [17] [29] [28] [27] [26] [25] [24] [23] [22] [21] [20] [19] [18] F-1-9 Paper Select indicator [16]...

  • Page 29: User Mode Items

    Chapter 1 1.2.3 User Mode Items 1.2.3.1 COMMON SETTINGS 0011-4287 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL MEMO: User modes of the USA model (Copy + Print + Scan + Fax + ADF + Network + PCL) are described. Menus and defaults may vary depending on the destination. For details, refer to the User's Guide.

  • Page 30: Fax Settings

    Chapter 1 Additional Functions Available Settings 6. INIT. COPY SET. OFF(*), ON *: indicates factory settings. 1.2.3.3 FAX SETTINGS 0011-4290 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL Additional Functions Available Settings 1.RX MODE FAXONLY, FAXTEL, ANSMODE, DRPD, MANUAL 2.

  • Page 31: Timer Settings

    Chapter 1 Additional Functions Available Settings 6. PAGE LAYOUT BINDING: LONG EDGE(*), SHORT EDGE MARGIN: mm (-50.0 mm to +50.0 mm; 0.0 mm(*)), INCHES (-01.90 INCHES to 01.90 INCHES; 00.00 INCHES(*)) 7. ERROR TIME OUT ON (5(*) to 300 SEC), OFF 8.

  • Page 32: System Settings

    Chapter 1 *: indicates factory settings. 1.2.3.9 SYSTEM SETTINGS 0011-4296 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL Additional Functions Available Settings 1. DEVICE INFO DEVICE NAME, LOCATION 2. NETWORK SETTINGS TCP/IP SETTINGS: IP ADDRESS AUTO. (OFF(*), ON(*); DHCP, BOOTP, RARP), IP ADDRESS, SUBNET MASK, GATEWAY ADDRESS, USE LPD (ON(*);...

  • Page 33: Maintenance By The User

    Chapter 1 1.2.4 Maintenance by the User 1.2.4.1 User Maintenance Items 0012-7145 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL T-1-5 Item Maintenance cycle Pressure plate cleaning As required Copyboard glass(large/small) cleaning, Copyboard As required holder (jump board) Fixing pressure roller cleaning...

  • Page 34: Safety

    Chapter 1 When cleaning the fixing pressure roller, manually feed A4 paper. MEMO: The time required for cleaning is about 100 seconds. 1) Press the user mode key " " to enter the user mode. 2) Using the left an right arrow keys, display the "ADJUST./CLEANING" menu. 3) Press the OK key.

  • Page 35: Handling The Laser Unit

    Chapter 1 CANON 30-2, SHIMOMARUKO, 3-CHOME, OHTAKU, TOKYO, 146, JAPAN. MANUFACTURED: THIS PRODUCT CONFORMS WITH DHHS RADIATION PERFORMANCE STANDARD 21CFR CHAPTER 1 SUBCHAPTER J. F-1-14 1.2.5.4 Handling the Laser Unit 0011-3533 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL The laser scanner unit emits invisible laser light inside it.

  • Page 36: Storing And Handling The Cartridge Before Unpacking

    Chapter 1 1.2.5.7 Storing and Handling the Cartridge Before Unpacking 0011-5778 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL Whether it is left packed or unpacked, or is fitted to the machine, the cartridge is subject to the effects of the environment, and will deteriorate over time. The speed of deterioration depends on the site or storage condition, and cannot be generalized.

  • Page 37: Product Specifications

    Chapter 1 1.2.6 Product Specifications 1.2.6.1 Product Specifications 0011-4328 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL Copyboard stream reading, fixed reading Body desktop Light source type Lens type CS (Contact sensor) Photosensitive medium OPC drum (24-mm dia.) Reproduction method...

  • Page 38: Adf Specifications

    Chapter 1 Energy save mode yes (manually ON/OFF; auto OFF after specific time, auto ON after fax reception/print data reception) Operating environment 15 to 30 deg C (temperature range) Operating environment 10 to 80% (humidity range) Operating environment 0.6 to 1.0 atm (atmospheric pressure) Noise Copying...

  • Page 39: Types Of Paper

    Chapter 1 Single-sided Two-sided Type Cassette feed Manual feed Cassette feed Manual feed Heavy paper 1/2/3 LTRR STMTR Bond paper LTRR STMTR LTRR Envelope Monarch COM10 ISO-B5 ISO-C5 Supplement: - The above copy speed does not change if magnification is changed. - The above copy speed does not change irrespective of whether paper is supplied from the cassette, the manual feed tray, or from the cassette feeding module.
  • Page 40 Chapter 1 1-20 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...

  • Page 41: Chapter 2 Basic Operation

    Chapter 2 Basic Operation Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 42 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 43 Contents Contents 2.1 Construction ...................................2-1 2.1.1 Functional Construction................................2-1 2.1.2 Functional Block Diagram ................................2-2 2.1.3 Image Processor PCB .................................. 2-2 2.1.4 DC Controller PCB ..................................2-3 2.1.5 Analog Processor PCB................................. 2-4 2.1.6 Power Supply PCB ..................................2-4 2.1.7 Relay PCB....................................2-4 2.1.8 Control Panel PCB ..................................
  • Page 44 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...

  • Page 45: Construction

    Chapter 2 2.1 Construction 2.1.1 Functional Construction 0011-3537 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL The machine may be divided into the following 7 functional blocks. Printer communication Fax communication system system Modem PCB*2 Network PCB*1...

  • Page 46: Functional Block Diagram

    Chapter 2 2.1.2 Functional Block Diagram 0011-3538 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL SL2002 M2001 SR2003 SR2001 Contact SR2004 SR2002 SL2003 SL2001 SR401 M401 snsor Speaker*1 J2006 J2005 J2008 J2007 J2004 J2003 J2001...

  • Page 47: Dc Controller Pcb

    Chapter 2 The firmware stored in the flash ROM may be either SYSTEM or BOOT. Using the service support tool, the following 3 types of firmware may be upgraded: SYSTEM and BOOT stored in the flash ROM and the firmware stored ion PCL ROM.

  • Page 48: Analog Processor Pcb

    Chapter 2 Toner Level Detection Mechanism While the machine is in wait state, the toner level detection signal (ADDTNR; based on the comparison of the developing bias output and the antenna output inside the cartridge) occurring when the developing AC bias is detected during normal rotation to monitor the toner level inside the cartridge.
  • Page 49 Chapter 2 T-2-1 Period Definition Purpose Remarks WAIT From when the power is turned The machine's mechanical and A check is made on the presence/absence of a (wait) on until the main motor is turned electrical states are checked. cartridge and for paper on and stopped.
  • Page 50 Chapter 2 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...

  • Page 51: Chapter 3 Original Exposure System

    Chapter 3 Original Exposure System Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 52 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 53 Contents Contents 3.1 Basic Constraction .................................3-1 3.1.1 Specifications, Control Methods, and Functions ......................... 3-1 3.1.2 Major Components..................................3-1 3.2 Basic Sequence ................................3-2 3.2.1 Basic Sequence at Power-on ................................ 3-2 3.2.2 Basic Sequence after Depression of Start Key (Book mode, One Sheet of original) ..............3-2 3.2.3 Basic Sequence after Depression of Start Key (ADF Mode, One Sheet of Original) ..............
  • Page 54 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...

  • Page 55: Basic Constraction

    Chapter 3 3.1 Basic Constraction 3.1.1 Specifications, Control Methods, and Functions 0012-7060 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL T-3-1 Item Function/Method Exposure light source Original scan In BOOK mode: Original scan is performed by moving the contact sensor (CS). When ADF is used: Original stream reading is performed with the contact sensor (CS) fixed.

  • Page 56: Basic Sequence

    Chapter 3 3.2 Basic Sequence 3.2.1 Basic Sequence at Power-on 0012-7070 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL Main power switch SREADY STBY Reader motor (M401) CS HP sensor (SR401) Shading Shading position position...

  • Page 57: Basic Sequence After Depression Of Start Key (Adf Mode, One Sheet Of Original)

    Chapter 3 CS HP sensor Original glass reading Shading Leading edge Trailing edge start position position of original of original 1. Moves to the start position after black shading/white shading. 2. Original scan 3. Moves to the standby position F-3-5 3.2.3 Basic Sequence after Depression of Start Key (ADF Mode, One Sheet of Original) 0012-7077 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL...

  • Page 58: Dirt Sensor Control

    Chapter 3 3.3.2 Dirt Sensor Control 3.3.2.1 Outline 0012-7080 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL The machine changes the original read position or corrects the read image depending on the presence/absence of dust on the stream reading glass or ADF platen guide, thus preventing dust from showing up in the image.

  • Page 59: Parts Replacement Procedure

    Chapter 3 T-3-2 Point Description Read reference position out 0.5 mm from the reference position to the inside of the roller About 1.0 mm from the reference position to the inside of the roller 3.4 Parts Replacement Procedure 3.4.1 Copyboard Glass 3.4.1.1 Removing the Copyboard Glass 0011-5275 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser-...

  • Page 60: Procedure After Replacing The Cs

    Chapter 3 F-3-13 4) Holding the belt, move the contact sensor unit to the cutout [1] in the reader frame. 5) Remove the cable holder [2] and flexible cable [3] to remove the contact sensor [4]. F-3-15 4) Taking care not to break the hook, remove the home position sensor [1] with a flathead screwdriver.

  • Page 61: Chapter 4 Original Feeding System

    Chapter 4 Original Feeding System Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 62 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 63 Contents Contents 4.1 Basic Constraction .................................4-1 4.1.1 Outline......................................4-1 4.1.2 Drive Mechanism..................................4-1 4.2 Basic Operation................................4-2 4.2.1 Outline of Operation Mode ................................4-2 4.2.2 Document Size Detection ................................4-3 4.2.3 Paper Pickup Operation ................................4-4 4.2.4 Reversal Operation..................................4-4 4.2.5 Delivery Operation..................................4-5 4.3 Detection Jams ................................4-6 4.3.1 Outline......................................
  • Page 64 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...

  • Page 65: Basic Constraction

    Chapter 4 4.1 Basic Constraction 4.1.1 Outline 0011-5773 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL The ADF is a feeding device used exclusively for stream reading, and its series of operations (original pickup, feeding, delivery) is performed using the drive of the ADF motor (M2001).

  • Page 66: Basic Operation

    Chapter 4 4.2 Basic Operation 4.2.1 Outline of Operation Mode 0011-6040 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL This machine has 2 operation modes. This machine operates in the operation mode specified by the host machine to perform printing. Operation mode names, brief outline of operations, and associated print modes are given in the following table: T-4-2 Operation mode name...

  • Page 67: Document Size Detection

    Chapter 4 F-4-4 F-4-5 4.2.2 Document Size Detection 0011-6042 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL This machine detects the original size while feeding the original. (Same-type mixed printing and banner paper printing are included.) The document feeder tray does not have a sensor for detecting the paper size.

  • Page 68: Paper Pickup Operation

    Chapter 4 T-4-3 Function Description Sensor used (symbol) Document length detection Detects the document length according to the Original placement sensor (SR2002) distance from the position where the original placement sensor (SR2002) turns on to the position where the original placement sensor (SR2002) turns off.

  • Page 69: Delivery Operation

    Chapter 4 b. Reversal/Feed 1 When the predetermined time has lapsed since the trailing edge of the fed original passed through the document edge sensor (SR2002), the ADF motor (M2001) stops. Immediately after this, the ADF motor turns in the reverse direction to feed the original to the registration roller and the shift solenoid (SL2003) turns on to release the delivery roller.

  • Page 70: Detection Jams

    Chapter 4 4.3 Detection Jams 4.3.1 Outline 0011-5776 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL This machine detects a jam using the sensors shown below. Document jam check timings are stored in the ROM on the image processor PCB to check whether a jam has occurred according to presence/absence of the document at the relevant sensor position.

  • Page 71: Adf

    Chapter 4 4.4 ADF 4.4.1 ADF 4.4.1.1 Removing the ADF 0011-5218 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser- Base MF6560PL / / LaserBase MF6580PL 1) Remove one screw [1], and then detach the reader rear cover (small). F-4-12 2) Remove the three connectors [1] and one screw [2] to disconnect the cable [3].

  • Page 72: Detaching The Open/Close Cover

    Chapter 4 F-4-16 F-4-17 4.4.2.3 Detaching the Open/Close cover 4.4.2.4 Removing the Pickup Tray 0011-5224 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser- 0011-5227 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser- Base MF6560PL / / LaserBase MF6580PL Base MF6560PL / / LaserBase MF6580PL 1) Remove the screw [1], and then remove the stopper.

  • Page 73: Feed Frame Unit

    Chapter 4 4.4.3 Feed Frame Unit 4.4.3.1 Removing the Feed Frame Unit 0011-5238 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser- Base MF6560PL / / LaserBase MF6580PL 1) Detach the front cover, rear cover, open/close cover, and pickup tray. 2) Disconnect the five connectors [1].

  • Page 74: Feed Roller

    Chapter 4 Base MF6560PL / / LaserBase MF6580PL 1) Remove the pickup/feed roller unit. 2) Remove the screw [1], and then remove the roller bracket [2]. 3) Remove the pickup roller [3]. F-4-24 F-4-27 4) Remove the two gears [1] and three screws [2], and then remove the 4.4.7 Feed Roller bracket [3].

  • Page 75: Document Edge Sensor

    Chapter 4 4.4.10 Document Edge Sensor 4.4.10.1 Removing the Original Placement Sensor 0011-6037 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser- Base MF6560PL / / LaserBase MF6580PL 1) Detach the front cover and open/close cover. 2) Open the ADF, remove the three screws [1], and then detach the ADF left lower cover [2].

  • Page 76: Registration Solenoid

    Chapter 4 Base MF6560PL / / LaserBase MF6580PL 1) Detach the rear cover. 2) Remove one connector [1] and one screw [2], and then remove the release solenoid [3]. F-4-36 3) Remove the screw [1], and then remove the pickup solenoid [2]. F-4-40 4.4.16 Separation Pad 4.4.16.1 Removing the Separation Pad...
  • Page 77 Chapter 4 4-13 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 78 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...

  • Page 79: Chapter 5 Laser Exposure

    Chapter 5 Laser Exposure Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 80 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 81 Contents Contents 5.1 Overview/Configuration ..............................5-1 5.1.1 Specifications and Control Mechanism ............................5-1 5.1.2 Main Components ..................................5-2 5.2 Parts Replacement Procedure............................5-3 5.2.1 Laser/Scanner Unit..................................5-3 5.2.1.1 Removing the Laser Scanner Unit .................................5-3 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 82 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...

  • Page 83: Overview/Configuration

    Chapter 5 5.1 Overview/Configuration 5.1.1 Specifications and Control Mechanism 0012-7112 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL T-5-1 Item Description Laser beam Number of laser beams 2 beams Scanner Motor Type of motor DC brushless motor Rotation control Constant speed rotaion control...

  • Page 84: Main Components

    Chapter 5 5.1.2 Main Components 0011-3548 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL The laser scanner unit consists of the following major components: - laser unit, which serves as the source of laser beam. - laser scanner motor, equipped with a 4-face mirror for laser scanning.

  • Page 85: Parts Replacement Procedure

    Chapter 5 5.2 Parts Replacement Procedure 5.2.1 Laser/Scanner Unit 5.2.1.1 Removing the Laser Scanner Unit 0011-5287 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser- Base MF6560PL / / LaserBase MF6580PL The laser scanner was-factory adjusted. Never disassemble it. 1) Detach the right cover, inner cover, delivery tray front cover, control panel, and delivery tray.
  • Page 86 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...

  • Page 87: Chapter 6 Image Formation

    Chapter 6 Image Formation Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 88 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...

  • Page 89: Overview/Configuration

    Contents Contents 6.1 Overview/Configuration ..............................6-1 6.1.1 Specifications and Control Mechanism ............................6-1 6.2 Image Formation Process...............................6-1 6.2.1 Reproduction Processes ................................6-1 6.3 Parts Replacement Procedure............................6-3 6.3.1 Transfer Charging Roller ................................6-3 6.3.1.1 Removing the Transfer Charging Roller.................................6-3 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 90 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...

  • Page 91: Overview/Configuration

    Chapter 6 6.1 Overview/Configuration 6.1.1 Specifications and Control Mechanism 0012-7116 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL T-6-1 Items Description Photosensitive drum Drum type OPC drum Drum diameter 24mm Cleaning mechanism Cleaning blade Processing speed 132.9mm/sec...
  • Page 92 Chapter 6 4. Fixing block 6. fixing Delivery 7.drum cleaning 5. Drum cleaning block 1. primary charging 1. Latent image formation block 5. separation 3. Transfer block 2. laser beam exposure 4. transfer 2. Development block 3. development Registration Multifeeder Rotation of photosensitive drum flow of paper Cassette pickup...

  • Page 93: Parts Replacement Procedure

    Chapter 6 6.3 Parts Replacement Procedure 6.3.1 Transfer Charging Roller 6.3.1.1 Removing the Transfer Charging Roller 0011-5296 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser- Base MF6560PL / / LaserBase MF6580PL 1) Remove the cartridge. 2) Release the two hooks [1], and then remove the transfer charging roller [2].
  • Page 94 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...

  • Page 95: Chapter 7 Pickup And Feed System

    Chapter 7 Pickup and Feed System Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 96 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 97 Contents Contents 7.1 Overview/Configuration ..............................7-1 7.1.1 Outline......................................7-1 7.2 Detection Jams ................................7-2 7.2.1 Jam Detection Outline.................................. 7-2 7.2.1.1 Outline..........................................7-2 7.2.1.2 Types of Jams........................................7-2 7.3 Cassette Pickup Unit ..............................7-3 7.3.1 Outline......................................7-3 7.3.2 Retry Pickup....................................7-3 7.3.3 Detecting the Size of Paper................................7-3 7.4 Duplex Unit..................................7-4 7.4.1 Outline......................................
  • Page 98 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...

  • Page 99: Overview/Configuration

    Chapter 7 7.1 Overview/Configuration 7.1.1 Outline 0011-3560 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL The machine is not equipped with a paper width detection mechanism. It uses center reference, in which paper moves centered through the pickup/feeding/delivery path.

  • Page 100: Detection Jams

    Chapter 7 7.2 Detection Jams 7.2.1 Jam Detection Outline 7.2.1.1 Outline 0011-3561 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL The machine is equipped with 3 jam sensors and 1 jam switch used to motor the movement of paper. The presence/absence of paper or of a jam is checked at such times as programmed in advance in the CPU of the DC controller PCB and in relation to the presence/ absence of paper over a specific sensor at a given time.

  • Page 101: Cassette Pickup Unit

    Chapter 7 7.3 Cassette Pickup Unit 7.3.1 Outline 0011-4052 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL Paper is picked up from the cassette under the control of the CPU on the DC controller PCB and using the drive of the main motor (M1). When the cassette pickup solenoid (SL2) goes ON, the drive of the main motor (M1) is transmitted to the cassette pickup roller assembly to rotate the cassette pickup roller.

  • Page 102: Duplex Unit

    Chapter 7 7.4 Duplex Unit 7.4.1 Outline 0011-4061 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL ñ{ã@ÇÃóºñþããéÜìÆçÏÇÕÅADCÉRÉìÉgÉçÅ[ÉââÒòHäÓî¬ÇÃCPUêßå‰ÇÃLJÇýÅAÉÅÉCÉìÉÇÅ[É^(M1)ÇÃãÏìÆÇ…ÇÊǡǃçsÇ»ÇÌÇÍÇÈÅBï\ñþÇÃÉvÉä ÉìÉgÇ™èIÇÌÇËópéÜÇÃå„í[Ç™îréÜÉZÉìÉT(SR5)ÇšîðÇØǃ10mmâ?ǨÇÈÇýÅAóºñþãÏìÆÉ\ÉåÉmÉCÉh(SL1)Ç™ONǵÅAÉÅÉCÉìÉÇÅ[É^ÅiM1ÅjÇÃãÏì ÆÇ™îréÜÉçÅ[ÉâÇ®ÇÊÇ— óºñþî¿ëóÉçÅ[ÉâÇ…ì`íBÇŠÇÍÇÈÅBópéÜÇÕÅAîréÜÉçÅ[ÉâÇ™ãtâÒì]ǵǃóºñþÉÜÉjÉbÉgÇ…óUì±ÇŠÇÍÅAóºñþî¿ëóÉçÅ[ÉâÇšåoóRǵǃÅAÉåÉWÉXÉgÉç Å[ÉâÇ‹ÇÝëóÇÁÇÍÇÈÅB óºñþópópéÜî¿ëóòHÇ…ÇÕÅAópéÜÇÃìûíBdžÇÈÇ¢ÇÕíþâ?ÇšåüímDzÇÈÉZÉìÉTÇÕǻǢÅB óºñþÉÜÉjÉbÉgÇÝÇÃópéÜÇšàÍíUí‚é~ǵÅAï¤éùǵǃǮǦëÿóØã@î\ÇÕǻǢÅB óºñþÉvÉäÉìÉgéûÇÃàÛç¸èáèòÇÕÅAóºñþ2ñáå¥çeÉRÉsÅ[ÇÃèÍçáÅAÉÅÉÇÉäã@î\Ç…ÇÊÇË1ñþñ⁄ó†ñþÅA1ñþñ⁄ï\ñþÅA2ñþñ⁄ó†ñþÅA2ñþñ⁄ï\ñþÇÃèáÇ…àÛç¸Ç ŠÇÍÇÈÅB SR11 F-7-4 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...

  • Page 103: Manual Feed Pickup Unit

    Chapter 7 7.5 Manual Feed Pickup Unit 7.5.1 Outline 0011-4056 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL Paper is picked up from the manual feed tray under the control of the CPU on the DC controller PCB and using the drive of the main motor (M1). When the manual feed pickup solenoid (SL5) goes ON, the drive of the main motor (M1) is transmitted as far as the manual feed pickup roller assembly to rotate the manual feed pickup roller.

  • Page 104: Parts Replacement Procedure

    Chapter 7 7.6 Parts Replacement Procedure 7.6.1 Cassette Pickup Roller 7.6.1.1 Removing the Cassette Pickup Roller 0011-5297 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser- Base MF6560PL / / LaserBase MF6580PL 1) Remove the cassette. 2) Place the machine with the rear panel down. However, since the exhaust duct projects about 16 mm from other area of the rear panel, insert stacks of paper or the like under the rear panel so that the machine stands stably.

  • Page 105: Cassette Pickup Solenoid

    Chapter 7 F-7-13 7.6.5 Paper Feed Roller 7.6.5.1 Removing the Cassete Feed Roller 0011-5298 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser- Base MF6560PL / / LaserBase MF6580PL 1) Remove the cassette. 2) Place the machine with the rear panel down. However, since the exhaust duct projects about 16 mm from other area of the rear panel, insert stacks of paper or the like under the rear panel so that the machine stands stably.

  • Page 106: Manual Pickup Sensor

    Chapter 7 F-7-16 3) While holding the manual separation pad [1], release the right hook [2] F-7-19 and then slide the right bearing [3]. 4) Remove the manual pickup roller [4]. 7.6.9 Manual Separation Roller 7.6.9.1 Removing the Manual Separation Pad 0011-5377 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser- Base MF6560PL / / LaserBase MF6580PL...

  • Page 107: Registration Sensor

    Chapter 7 [3]. F-7-22 6) Remove the two screws [1] and move the guide [2] out of the way. 7) Remove the drum shutter lever 1/2 [3]. F-7-25 7.6.11 Registration Sensor 7.6.11.1 Removing the Registration Sensor 0011-5383 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser- Base MF6560PL / / LaserBase MF6580PL 1) Remove the two shafts [1], and then remove the transfer guide [2].

  • Page 108: Duplex Pick-Up Solenoid

    Chapter 7 F-7-30 F-7-27 When installing the duplex pickup solenoid, be sure to install the solenoid le- 3) Remove the two bosses [1], disconnect the connector [2], and then slide ver [1] on the arm [2]. the registration sensor unit [3] toward you to remove it. F-7-31 F-7-28 7.6.13 Registration Clutch...
  • Page 109 Chapter 7 2) Remove the three screws [1], and then remove the main motor [2]. 3) Disconnect the connector [3]. F-7-33 7-11 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 110 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...

  • Page 111: Chapter 8 Fixing System

    Chapter 8 Fixing System Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 112 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 113 Contents Contents 8.1 Overview/Configuration ..............................8-1 8.1.1 Specifications, Control Mechanisms, and Functions ........................8-1 8.1.2 Outline......................................8-1 8.2 Various Control Mechanisms............................8-2 8.2.1 Controlling the Temperature of the Fixing Unit .......................... 8-2 8.2.1.1 Outline..........................................8-2 8.2.2 Controlling the Fixing Film Temperature............................ 8-2 8.2.2.1 Controlling the Fixing Film Temperature ...............................8-2 8.2.2.2 Target Temperatures by Mode ..................................8-2 8.3 Protection Function ................................8-3 8.3.1 Outline......................................
  • Page 114 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...

  • Page 115: Overview/Configuration

    Chapter 8 8.1 Overview/Configuration 8.1.1 Specifications, Control Mechanisms, and Functions 0012-7178 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL T-8-1 Item Function/Method Fixing method by fixing film + pressure roller Fixing heater Unitary flat heater incorporating both main heater and sub heater Fixing temperature detection [1] Main thermistor (TH1): Temperature control and fault detection...

  • Page 116: Various Control Mechanisms

    Chapter 8 8.2 Various Control Mechanisms 8.2.1 Controlling the Temperature of the Fixing Unit 8.2.1.1 Outline 0011-4252 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL The fixing film unit has a plate-shaped fixing heater built into it for heating the fixing film. The fixing heater is equipped with 2 thermistor: a main thermistor in the middle and a sub thermistor at the end.

  • Page 117: Protection Function

    Chapter 8 *1: Target fixing temperature at startup. When the initial temperature of the fixing unit is high, the target temperature is lowered. In the continuous copy mode, the target temperature is lowered. *2: Number of sheets controlled at the initial target temperature. If it is exceeded, the target temperature is lowered. The prescribed number of sheets varies with the paper size.

  • Page 118: Parts Replacement Procedure

    Chapter 8 8.4 Parts Replacement Procedure 8.4.1 Fixing Unit 8.4.1.1 Removing the Fixing Unit 0011-5386 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser- Base MF6560PL / / LaserBase MF6580PL 1) Detach the rear cover and front cover, and then detach the rear-left cover. 2) Remove the boss [1], and then slide the guide (front) [2] to remove it.

  • Page 119: Fixing Film Unit

    Chapter 8 F-8-11 When reinstalling the fixing unit, align it with the mark [1]. F-8-9 8) Remove the four screws [1], and then remove the fixing unit [2]. F-8-12 If a parallelism error occurs during duplex printing, make the following ad- justment: Attach the clamping plate [1] removed in step 2 using the screw as shown below.

  • Page 120: Fixing Pressure Roller

    Chapter 8 2) Remove the three screws [1], and then remove the reversing guide [2] and sensor lever unit [3]. F-8-17 5) Remove the two screws [1], and then remove the grounding plate [2] and guide [3]. F-8-14 3) Remove the two pressure spring [1], and then remove the two pressure plate [2].

  • Page 121: Fixing Delivery Paper Sensor

    Chapter 8 4) Release the hook and remove the gear [1]. The remaining part is the pressure roller [2]. F-8-21 Precautions for Installation of Pressure Roller When reinstalling the pressure roller, pay attention to the following: 1. The pressure roller bearing must be in touch with the leaf spring [1]. 2.
  • Page 122 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 123 Chapter 9 External and Controls Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 124 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 125 Contents Contents 9.1 Control Panel..................................9-1 9.1.1 Outline......................................9-1 9.2 Fan....................................9-1 9.2.1 Outline......................................9-1 9.3 Power Supply .................................9-2 9.3.1 Power Supply ....................................9-2 9.3.1.1 Outline..........................................9-2 9.3.1.2 Rated Output of the Power Supply PCB .................................9-2 9.3.2 Protection Function ..................................9-2 9.3.2.1 Protective Functions......................................9-2 9.4 Parts Replacement Procedure............................9-4 9.4.1 External Cover .....................................
  • Page 126 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...

  • Page 127: Control Panel

    Chapter 9 9.1 Control Panel 9.1.1 Outline 0012-7126 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL The machine's control panel consists of the following PCBs, and is controlled by the ASIC of the image processor PCB. Image processor Control panel PCB Key SW...

  • Page 128: Power Supply

    Chapter 9 9.3 Power Supply 9.3.1 Power Supply 9.3.1.1 Outline 0011-5770 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL When the main power switch (SW1) is turned on, AC power is supplied to the low-voltage power supply circuit in the power supply PCB. The low-voltage power supply circuit supplies +3.3 V, +5 V, and +24 V to operate the machine.
  • Page 129 Chapter 9 The power supply PCB is equipped with an over-current/over-voltage protection mechanism to prevent damage to the power circuit in the event of an over-current or over-voltage, as caused by a short circuit or the like on the load side. If the over-current/over-voltage protective mechanism has gone ON, disconnect the power cord, and correct the fault;...

  • Page 130: Parts Replacement Procedure

    Chapter 9 9.4 Parts Replacement Procedure 9.4.1 External Cover 9.4.1.1 Detaching the Reader Rear Cover (Small) 0011-5392 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser- Base MF6560PL / / LaserBase MF6580PL 1) Remove the screw [1], and then detach the reader rear cover (small). F-9-4 9.4.1.2 Detaching the Reader Rear Cover 0011-5393...

  • Page 131: Detaching The Reader Left Cover

    Chapter 9 F-9-8 9.4.1.6 Detaching the Rear-left Cover 0011-5397 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser- Base MF6560PL / / LaserBase MF6580PL 1) Detach the rear cover and reader left cover. 2) Remove the two screws [1]. 3) Open the left door.

  • Page 132: Detaching The Right Cover

    Chapter 9 F-9-10 9.4.1.8 Detaching the Right Cover 0011-5399 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser- Base MF6560PL / / LaserBase MF6580PL 1) Detach the rear cover. 2) To release the hooks at the lower right of the machine, float the right side of the machine about 10 cm above the edge of the desk and so on.

  • Page 133: Detaching The

    Chapter 9 F-9-13 9.4.1.10 Detaching the Delivery Tray 0011-5401 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser- Base MF6560PL / / LaserBase MF6580PL 1) Detach the operation panel. 2) Detach the delivery tray [1]. F-9-12 9.4.1.9 Detaching the Front Cover 0011-5400 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser- Base MF6560PL / / LaserBase MF6580PL...

  • Page 134: Image Processor Pcb

    Chapter 9 F-9-17 8) Remove the screw [1], and then remove the ROM PCB [2]. 9) Remove the memory PCB [3]. 10) Disconnect all connectors and flexible cables from the image processor PCB. 11) Remove the six screws [4], and then remove the image processor PCB [5].

  • Page 135: Dc Controller Pcb

    Chapter 9 If automatic adjustment fails, "NG" appears. Perform the following procedure: Clean the platen guide of the DADF and the document glass of the host ma- chine, and then retry auto adjustment. 9.4.4 DC Controller PCB 9.4.4.1 Removing the DC Controller PCB 0011-5464 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser- Base MF6560PL / / LaserBase MF6580PL...

  • Page 136: Modem Pcb

    Chapter 9 9.4.8 Modem PCB Base MF6560PL / / LaserBase MF6580PL 1) Detach the rear cover. 9.4.8.1 Removing the Modem PCB 2) Disconnect the two connectors [1], and then release the cable from the 0011-5468 cable clamp. LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser- 3) Remove the three screws [2], and then remove the shield [3].

  • Page 137: Speaker

    Chapter 9 2) Disconnect the connector [1], release the two hooks [2], and then remove the heat discharge fan [3]. F-9-30 9.4.13 Speaker 9.4.13.1 Removing the Speaker 0011-5493 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser- Base MF6560PL / / LaserBase MF6580PL 1) Detach the right cover and rear cover.
  • Page 138 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...

  • Page 139: Chapter 10 Maintenance And Inspection

    Chapter 10 Maintenance and Inspection Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 140 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...

  • Page 141: Periodically Replaced Parts

    Contents Contents 10.1 Periodically Replaced Parts ............................10-1 10.1.1 Periodically Replaced Parts ..............................10-1 10.2 Consumables ................................10-1 10.2.1 Durables ....................................10-1 10.3 Periodical Service ..............................10-1 10.3.1 Periodeical Service Items................................. 10-1 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 142 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...

  • Page 143: Periodically Replaced Parts

    Chapter 10 10.1 Periodically Replaced Parts 10.1.1 Periodically Replaced Parts 0011-5784 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL The machine does not have parts that require periodical replacement. 10.2 Consumables 10.2.1 Durables 0011-5785 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL The machine does not have durables.
  • Page 144 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 145 Chapter 11 Measurement and Adjustments Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 146 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 147 Contents Contents 11.1 Scanning System ................................11-1 11.1.1 Procedure after Replacing the CS ............................11-1 11.2 Fixing System ................................11-1 11.2.1 平行性の調整..................................11-1 11.3 Electrical Adjustments ...............................11-1 11.3.1 Procedure after Replacing the Image Processor PCB......................11-1 11.3.2 Actions to Take before All Clearing (Backing up the User Data) ................... 11-1 11.4 ADF....................................11-2 11.4.1 Outline......................................
  • Page 148 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...

  • Page 149: Scanning System

    Chapter 11 11.1 Scanning System Be sure to back up the user data with the data export function before starting the all-clear operation, and then load the user data with tbe data import function. 11.1.1 Procedure after Replacing the CS - To export and import user data, a PC and a USB cable are required.

  • Page 150: Adf

    Chapter 11 Base MF6560PL / / LaserBase MF6580PL 11.4 ADF This machine has the following adjustment items. Make the necessary ad- justments after replacing each part. T-11-1 11.4.1 Outline 11.4.1.1 Outline 0011-7337 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser- Adjustment type Replaced parts Perpendicularity adjustment...

  • Page 151: Adjusting The Horizontal Registration

    Chapter 11 9) Using the numeric keys, change the value to determine the optimum value. Next, press the OK key. (Default: 32) Do not change the adjustment value excessively. 11.4.3.2 Adjusting the Horizontal Registration 0011-7341 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser- Base MF6560PL / / LaserBase MF6580PL F-11-7 1) Load the test chart in the DADF and make a copy of it.
  • Page 152 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...

  • Page 153: Chapter 12 Correcting Faulty Images

    Chapter 12 Correcting Faulty Images Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 154 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 155 Contents Contents 12.1 Initial Checkup................................12-1 12.1.1 Site Environment ..................................12-1 12.1.2 Checking the Paper .................................. 12-1 12.1.3 Checking the Placement of Paper ............................12-1 12.1.4 Checking the Durables ................................12-1 12.1.5 Checking the Units and Functional Systems ........................... 12-1 12.1.6 Others ....................................... 12-2 12.2 Outline of Electrical Components..........................12-3 12.2.1 Clutch/Solenoid/Motor/Fan ..............................
  • Page 156 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...

  • Page 157: Initial Checkup

    LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL a. Be sure the paper being used is of a type recommended by Canon. b. Be sure that the paper is not moist. Try using paper fresh out of package.

  • Page 158: Others

    Chapter 12 - Check whether the main power switch and the power switch on the operation pane are turned on. - Check the power cables and signal cables of options are connected properly. - Check whether no fuse on PCBs is blown. - Check whether the user uses the machine properly.

  • Page 159: Outline Of Electrical Components

    Chapter 12 12.2 Outline of Electrical Components 12.2.1 Clutch/Solenoid/Motor/Fan 12.2.1.1 List of Clutches/Solenoids/Motors/Fans 0011-5808 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL <Main body> T-12-1 Symbol Name Function Part No. Connection jack No. Error Registration clutch Drives the registration roller.

  • Page 160: Sensor/Switch

    Chapter 12 SL2003 M2001 SL2001 SL2002 F-12-2 12.2.2 Sensor/Switch 12.2.2.1 List of Sensors 0011-5809 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL <Main body> T-12-3 Symbol Name Function Part No. Connection jack No. Jam code SR401 CS HP sensor...

  • Page 161: Others

    Chapter 12 Symbol Name Function Part No. Connection jack No. Error SR2003 Registration sensor Detects registration paper. WG8-5696 J406 (Analog processor PCB) 0007, 0010 SR2004 Separation rear sensor Detects paper after WG8-5696 J406 (Analog processor PCB) 0007 separation. SR2001 SR2004 SR2002 SR2003 F-12-4...
  • Page 162 Chapter 12 There are no parts applicable to ADF. 12-6 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 163 Chapter 12 12-7 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 164 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...

  • Page 165: Error Code

    Chapter 13 Error Code Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 166 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 167 Contents Contents 13.1 Error Code..................................13-1 13.1.1 List of Error Codes................................... 13-1 13.2 Jam Code..................................13-2 13.2.1 Jam Codes (Main body) ................................13-2 13.2.2 Jam Codes (ADF) ..................................13-2 13.3 Fax Error Codes .................................13-2 13.3.1 Outline...................................... 13-2 13.3.1.1 Error Code Outline ......................................13-2 13.3.2 User Error Code ..................................
  • Page 168 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...

  • Page 169: Error Code

    Chapter 13 13.1 Error Code 13.1.1 List of Error Codes 0011-6947 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL T-13-1 Display Detail Code Main Cause/Symptom Countermeasure Code E000 0000 Startup error The temperature detected by the main or sub thermistor does - Check the fixing film connector.

  • Page 170: Jam Code

    Chapter 13 13.2 Jam Code 13.2.1 Jam Codes (Main body) 0011-7062 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL T-13-2 Code Name Sensor No. Description 0104 Delay jam in paper pickup SR11 The registration sensor cannot detect the leading edge of paper from the moment paper pickup starts section to the moment the jam detection time is reached.

  • Page 171: Service Error Code

    Chapter 13 Tx/Rx Description #0018 [Tx/Rx] auto call initiation has failed. #0037 [Rx] image memory overflow at time of reception has occurred. #0059 [Tx] The number you dial and connected number (CSI) does not match. #0995/0099 [Tx/Rx] a memory communication reservation has been cancelled. 13.3.3 Service Error Code 13.3.3.1 Service Error Code 0012-5782...
  • Page 172 Chapter 13 Tx/Rx Description ##0764 [Tx] at time of ECM transmission, the procedural signal has been transmitted more than specified after transmission of PPS- EOM. ##0765 [Tx] at time of ECM transmission, no meaningful signal is received after transmission of PPS-EOP, causing the procedural signal to be transmitted more than specified.

  • Page 173: Chapter 14 Service Mode

    Chapter 14 Service Mode Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 174 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...

  • Page 175: Rtn Transmission Condition (1)><003: Rtn Transmission Condition (2)><004: Rtn Transmission

    Contents Contents 14.1 Service Soft Switch Settings (SSSW) ........................14-1 14.1.1 SSSW-SW01:................................... 14-1 14.1.1.1 List of Functions ......................................14-1 14.1.1.2 Detailed Discussions of Bit 0 ..................................14-1 14.1.2 SSSW-SW03.................................... 14-1 14.1.2.1 List of Functions ......................................14-1 14.1.2.2 Detailed Discussions of Bit 7 ..................................14-1 14.1.3 SSSW-SW04.................................... 14-1 14.1.3.1 List of Functions ......................................14-1 14.1.3.2 Detailed Discussions of Bit 2 ..................................14-1 14.1.3.3 Detailed Discussions of Bit 3 ..................................14-2...
  • Page 176 Contents 14.3.7 <013: T.30 EOL timer> ................................14-7 14.3.8 <016: time length to first response at time of fax/tel switchover> ..................14-7 14.3.9 <017: pseudo RBT signal pattern ON time length><018: pseudo RBT signal pattern OFF time length (short)><019: pseudo RBT signal pattern OFF time length (long)>...
  • Page 177 Contents 14.5.2.12 <053: Margin adjustment at the leading edge of the copy>........................14-12 14.5.2.13 <054: Margin adjustment at the trailing edge of the copy> ........................14-12 14.5.2.14 <055: Margin adjustment at the right edge of the copy> ........................14-12 14.5.2.15 <056: Margin adjustment at the left edge of the copy> ..........................14-12 14.6 Counter Indication (COUNTER) ..........................14-13 14.6.1 Counters ....................................
  • Page 178 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...

  • Page 179: Service Soft Switch Settings (Sssw)

    Chapter 14 14.1 Service Soft Switch Settings (SSSW) 14.1.1 SSSW-SW01: 14.1.1.1 List of Functions 0011-4093 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL T-14-1 Function service error code output not output not used not used not used not used...

  • Page 180: Detailed Discussions Of Bit 3

    Chapter 14 Any of the following error codes may be indicated at time of transmission ##0100, ##0280, ##0281, ##0750, ##0753, ##0754, ##0755, ##0758, ##0759, ##0760, ##0763 ##0764, ##0765, ##0768, ##0769,##0770, ##0773, ##0775, ##0778, ##0780, ##0783, ##0785, ##0788 14.1.3.3 Detailed Discussions of Bit 3 0011-4099 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL Use it to select an appropriate reception mode after transmission of the CFR signal.

  • Page 181: Sssw-Sw13

    Chapter 14 Function Time-out period for one page upon reception not used Respective page timer settings for transmission and for enable do not enable reception The machine will stop the ongoing communication if the transmission/reception of a single original page takes 32 min or more. To use the timer for a purpose other than this function, refer to the tables that follow, and select an appropriate time length.

  • Page 182: Sssw-Sw28

    Chapter 14 14.1.7.2 Detailed Discussions of Bit 2 0011-4109 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL Use it to specify whether to convert or not convert an inch-configuration resolution into a millimeter-configuration resolution for image read in G3 transmission: either in sub scanning direction only or in both main and sub scanning directions.

  • Page 183: Menu Switch Settings (Menu)

    Chapter 14 Function Not used 14.1.9.2 Detailed Discussions of Bit 5 0011-4124 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL When "Detect with the new method" is selected, tone is detected for 3.5 seconds before call origination in order to discriminate between dial tone and voice. If dial tone is detected and the time since line seizure is 3.5 seconds or longer, call origination takes place immediately.

  • Page 184: Numeric Parameter Settings (Numeric Param.)

    Chapter 14 14.3 Numeric Parameter Settings (NUMERIC Param.) 14.3.1 <No.010 Frequency of the pseudo CI signal> 0011-4147 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL T-14-14 Item Range of settings RTN transmission condition(1) 1% to 99% RTN transmission condition (2) 2 to 99 item...

  • Page 185: 011: T.30 T1 Timer (For Reception)

    Chapter 14 14.3.6 <011: T.30 T1 timer (for reception)> 0011-4152 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL Set the T1 timer for the receiver (wait time after DIS transmission starts until a significant signal is received). 14.3.7 <013: T.30 EOL timer>...

  • Page 186: 024:Cis Scan Position During Adf Scanning

    Chapter 14 Function Default Setting range Unit 045: Horizontal scan end position correction 0-200 one unit=0.1mm (fine:scanning on ADF) 046: Horizontal scan end position correction 0-200 one unit=0.1mm (standard:scanning on ADF) 047: Vertical scan magnification correction (scanning 0-32 one unit=0.1% on ADF) 048: Horizontal scan magnification correction...

  • Page 187: 042: Horizontal Scan Start Position Adjustment (When Scanning On A Document Fed From Adf)

    Chapter 14 14.4.10 <042: Horizontal scan start position adjustment (when scanning on a document fed from ADF)> 0011-4178 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL Adjust the position at which horizontal scanning of a document fed from the ADF starts. The larger the adjustment value, the narrower the top margin of the image becomes.

  • Page 188: Printer Function Settings (Printer)

    Chapter 14 1: FOOLSCAP 2: OFFICIO 3: E_OFFICIO 4: G_LTR_R 5: A_LTR_R 14.5 Printer Function Settings (PRINTER) 14.5.1 Service Soft Switch Settings (SSSW) 14.5.1.1 SSSW-SW05 14.5.1.1.1 List of Functions 0011-4190 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL T-14-15 Function not used...

  • Page 189: Sssw-Sw15

    Chapter 14 during printing. Implementation of this mode would degrade the throughput. 14.5.1.2.5 Detailed Discussions of Bit 5 0012-7581 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL Select whether to enable or disable silent mode. Select "Enable" to modify the registration loop amount and thus reduce noises or squeaks the registration rollers produce after picking paper from the individual paper inlets.

  • Page 190: 032: Top Registration Adjustment (Cassette)

    Chapter 14 14.5.2.3 <032: Top registration adjustment (cassette)> 0011-4198 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL Adjust the top registration margin of paper picked from cassettes. The larger the adjustment value, the wider the top margin of the image becomes. 14.5.2.4 <033: Top registration adjustment (duplex unit)>...

  • Page 191: Counter Indication (Counter)

    Chapter 14 14.6 Counter Indication (COUNTER) 14.6.1 Counters 0011-4243 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL This copier is furnished with a maintenance/supplies counter set (DRBL-1), which can be used to gain rough measures of when to replace supplies. The counter set increments by one on counting each sheet of small-sized paper (up to A4/LTR) and by two on counting each sheet of large-sized paper (larger than A4/LTR).

  • Page 192: Report Output (Report)

    Chapter 14 14.7 Report Output (REPORT) 14.7.1 Report Output 0011-4211 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL The table below lists the kinds of reports that are supported. Item Explanation SERVICE DATA LIST Service mode service soft switch output (SSSW, MENU, NUMERIC Param., SPECIAL, NCU, SCAN, PRINT, SYSTEM, ROM, start date) SYSTEM DATA LIST...
  • Page 193 Chapter 14 F-14-2 *1: TX, number of total pages transmission. *2: Total number of pages transmitted/received according to original size. *3: RX, number of total pages reception. *4: Total number of pages transmitted and received for each modem speed *5: Total number of pages transmitted/received in connection with different modem speeds (Standard, Fine, Super Fine, Ultra Fine). *6: Total number of pages transmitted and received for each coding method *7: Total number of pages transmitted and received in each mode *8: Total number of pages printed/scanned...

  • Page 194: Counter List

    Chapter 14 2003 09/02 TUE 12:00 #1 LATEST #000 START TIME 09/02 10:00 OTHER PARTY 12345678 MAKER CODE 10001000 MACHINE CODE 0100001 00000000 RCV V.8 FRAME E0 81 85 D4 90 7E 00 00 SYMBOL RATE 3429 baud DATA RATE 28800 bps [V.
  • Page 195 Chapter 14 07/12/2005 13:07 FAX *************************************** *** JAM/ERR LOG REPORT *************************************** [1] [2] [3] [4] [5] [6] [8] [9] [10] 01 04/12 12:17 20:03 4 0012 000026 1 A4 20 04/12 12:17 20:03 4 0012 000026 1 A4 [1] [2] [3] [4] [5] 01 04/12 12:17 15:36 3 0010 0000 000691...

  • Page 196: Spec List

    Chapter 14 Error history description (ERR) Item Explanation Total counter display 14.7.6 Spec List 0011-4216 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL 07/12/2005 13:07 FAX ***************************** *** SPEC REPORT ***************************** TYPE _ _ _ _ _ U.

  • Page 197: Service Label

    Chapter 14 [14] Backup battery availability 14.7.7 Service Label 0011-4217 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL Enter the value given in the service label affixed to the rear cover when it has been replaced with a new one. #PRINT>#PRINT NUMERIC #SCAN>#SCAN NUMERIC FACTORY...

  • Page 198: Download (Download)

    Chapter 14 14.8 Download (DOWNLOAD) 14.8.1 Download 0011-4218 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL The following parts of this unit can be upgraded by executing download mode using the service support tool (SST) (for more information, see the "Upgrading" section): Main unit - Flash ROM (system + boot) mounted on the image processor PCB...

  • Page 199: Test Mode (Test)

    Chapter 14 14.11 Test Mode (TEST) 14.11.1 Overview 14.11.1.1 Outline 0011-4223 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL Test mode must be executed by keeping track the flow of menu items appearing on the LCD. Menu items in test mode are organized into seven blocks as described below.
  • Page 200 Chapter 14 Numerals enclosed in parentheses denote a numeric keypad key to be pressed each. Group Subgroup Item 1 Item 2 Item 3 Explanation (1) RELAY TEST [1] - [2] (1) RELAY TEST 1 NCU relay (and switch) ON/OFF test (2) RELAY TEST 2 230 V common NCU test (2) FREQ TEST [0] - [6]...

  • Page 201: Dram Test

    Chapter 14 Numerals enclosed in parentheses denote a numeric keypad key to be pressed each. Group Subgroup Item 1 Item 2 Item 3 Explanation (1) FUNCTION TEST G3 4800bps G3 4800 bps signal transmission test (3) 6-3 SENSOR [1] - [8] Sensor checks (1) SENSOR CHECK 0:NORMAL 1:LATCH (0) SENSOR NORMAL [0] - [2]...

  • Page 202: Scan Test

    Chapter 14 14.11.3 Scan Test 14.11.3.1 Scan Test ((2) SCAN TEST) 0011-7361 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL Scan test ((2) SCAN TEST) Press the numeric keypad key 2 on the test mode menu to select the CCD test. Press numeric keypad keys 1, 3 and 4 during the CCD test to carry out the individual tests described below.
  • Page 203 Chapter 14 Press '1'or '2' on the keypad on the Modem test menu to select relay test mode. Use the keypad to operate the various relays of the NCU. '2' on the keypad is used for 230V machine. Numeric keypad key 1 The input key and relay are shown below: RELAY TEST1 OFF OFF OFF OFF OFF OFF...

  • Page 204: Faculty Test

    Chapter 14 A press on '6' on the keypad from the MODEM test menu selects the tonal signal/DTMF signal reception 0 test. In this signal, the tonal signal/DTMF signal received from the telephone line terminal can be checked to find out if it was detected by the modem. Tonal signal reception test MODEM TEST OFF OFF OFF...
  • Page 205 Chapter 14 Sensor test (6-3: SENSOR) This mode is used to verify the status of the unit sensors from LCD indications. Press numeric keypad key 3 on the FUNCTION TEST menu to select the sensor test. LCD indications change as the associated sensors turn on and off. 6-3:SENOR [1] - [8] SENSOR CHECK...
  • Page 206 Chapter 14 REF xxx ANT xxx |ANT - LEF| xxx |ANT - LEF| BSCT on BDOC[A3 ] BDSS3-0 [of of of of] NCR Sts NCR None TNT 0000 LAST of EXIT of REG of CVR of WID1 of WID2 of WID3 of WID4 of WID1:...
  • Page 207 Chapter 14 [N] [F] [P] [J] F-14-15 Operation key test (2) correspondence diagram 09: [I] 01: [A] 05: [E] 10: [J] 02: [B] 06: [F] 11: [K] 03: [C] 07: [G] 12: [L] 04: [D] 08: [H] F-14-16 The flow of operation panel testing is shown below. 14-29 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...

  • Page 208: Cleaning Mode

    Chapter 14 6 - 7 : O P E R A T I O N P A N E L LCD test Press the start key. All-H character display Press the start key. All-black display Press the start key. All-LED illumination LED lamp test Press the start key.
  • Page 209 Chapter 15 Upgrading Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 210 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 211 Contents Contents 15.1 Outline..................................15-1 15.1.1 Overview of Upgrade................................15-1 15.2 Making Preparations ..............................15-1 15.2.1 Registering the System Software ............................. 15-1 15.2.2 Connection ....................................15-3 15.3 Downloading System Software..........................15-3 15.3.1 Downloading the System Software............................15-3 15.3.1.1 Downloading Procedure....................................15-3 15.3.2 Downloading the Boot Software.............................. 15-8 15.3.2.1 Downloading Procedure....................................15-8 15.3.3 Otehr Upgrade Methods................................
  • Page 212 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...

  • Page 213: Outline

    Chapter 15 15.1 Outline 15.1.1 Overview of Upgrade 0011-5797 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL This machine and options can be upgraded by downloading system software programs from the personal computer (hereafter called as the PC) in which a service support tool (hereafter called SST) has been loaded.
  • Page 214 Chapter 15 5) Select the drive in which the system CD is inserted, and then click the "SEARCH" button. F-15-2 6) A list of system software programs contained in the system CD is displayed. Uncheck the checkboxes of unnecessary folders and system software programs, and then click the "REGISTER"...

  • Page 215: Connection

    Chapter 15 F-15-4 15.2.2 Connection 0011-5800 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL 1) Turn off the main power switch of this machine, and then disconnect the cables connected to this machine. 2) Connect USB connector on the back of this machine to the PC using the USB cable [1].
  • Page 216 Chapter 15 3) Select "MFP" in "Target Selection", and then select "E243" in "Model List". F-15-7 4) Double-click the "System" folder in "Model List" to check the system software version. Select "USB" in "Interface", and then click the "START" button. F-15-8 5) Turn on the power switch of the host machine.
  • Page 217 Chapter 15 10) When connection is complete, the following screen appears. Click the OK button. F-15-10 11) Click "System Software Download" on the Selecting a Job screen. MEMO: This machine does not use the "Upload the Backup Data" and "Download the Backup Data" functions not displayed on the Selecting a Job screen. F-15-11 12) Select the version of the system software to download from the list.
  • Page 218 Chapter 15 F-15-12 13) When downloading starts, the progress of downloading is displayed by the progress bar. F-15-13 14) While the received data is being written to the flash ROM after completion of downloading, the following screen is displayed: F-15-14 15-6 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 219 Chapter 15 Never turn off the power switch of the machine while the data is being written to the flash ROM. If it becomes impossible to start this machine after turning its power switch off, the image processor PCB must be replaced. 15) When writing of the data to the Flash ROM is complete, its result is displayed.

  • Page 220: Downloading The Boot Software

    Chapter 15 F-15-17 18) Click the "EXIT" button to terminate SST. F-15-18 19) Confirm the massage "ROM WRITE OK" indicated on the control panel of the host machine, and then turn off/on the main power switch. 15.3.2 Downloading the Boot Software 15.3.2.1 Downloading Procedure 0011-5802 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL...

  • Page 221: Service Tools

    Chapter 16 Service Tools Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 222 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...

  • Page 223: Special Tools

    Contents Contents 16.1 Service Tools................................16-1 16.1.1 Special Tools.................................... 16-1 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 224 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...

  • Page 225: Service Tools

    Chapter 16 16.1 Service Tools 16.1.1 Special Tools 0011-5806 LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / KaserBase MF6560PL / / LaserBase MF6580PL In addition to the standard tools set, you will need the following special tools for servicing of the machine: T-16-1 Tool name Tool No.
  • Page 226 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 227 Feb 22 2006 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...
  • Page 228 Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com...

Table of Contents