Sip Settings - Furuno Felcom 250 Operator's Manual

19. With the [DNS (Primary)] field selected, press the Enter key.
20. Enter the IP address of the primary DNS server and press the Enter key.
21. Press
22. Enter the IP address of the secondary DNS Server and press the Enter key.
Note: If only the Secondary DNS Server address is entered, the Primary DNS is
set to the same value.
23. Press the
24. Press the
3.5.3

SIP settings

This section describes SIP server settings. Do the procedure if it is necessary to enter
SIP settings.
1. In the [Settings] menu, press 3 to select [SIP] to show
the [SIP] menu.
2. Press one of keys 1 -5 depending on your objective.
1: Set SIP client.
2: Set SIP proxy server.
3: Set SIP server port number.
4: Set SIP server authentication interval.
5: Set RTP port.
3. Set SIP by referring to the descriptions in the table.
Menu
Client set.*
Proxy server*
S/L port
Expire time
RTP port*
to select the [DNS (Secondary)] field, and press the Enter key.
key to return to the [Manual set.] menu.
key to close the menu.
Item
1 Phone number Enter extension number (1000 - 9999).
Password
Nickname
2 Automatic
Manual
Server port
Local port
-
RTP port 1
3
RTP port 2
Description
Enter SIP password. Up to a maximum of eight al-
phanumeric characters (upper case alphabet only)
can be used. This password is for identification at the
SIP server.
Enter a nickname (maximum of 50 alphabet). The
nickname appears on the display of the called exten-
sion handset.
The IP address (IP address of communication unit)
of the SIP proxy server is automatically changed.
Enter the address (IP address of communication
unit) of the SIP proxy server manually.
Enter server port number (0 - 65535).
Enter local port number (0 - 65535).
Enter expiration time (1800 - 7200 (sec.)).
Enter RTP port 1 (16384 - 32766, even number
only). Set different from RTP port 2.
Enter RTP port 2 (16384 - 32766, even number
only). Set different from RTP port 1.
3. SETTINGS FOR HANDSET
3-17