Settings For Handset; Sound Menu; Notification Sound Setting - Furuno Felcom 250 Operator's Manual

3.

SETTINGS FOR HANDSET

This chapter describes the menus [Sound], [Display], [SMS], [Web], and [Settings].
Also described are system messages from connected equipment, list of connected
equipment, and how to display various information.
3.1

Sound Menu

The [Sound] menu sets options for internal and external phones, message notification
for SMS messages and system messages, key beep, and microphone volume.
1. At the idle screen, press the Enter key to show the main menu.
2. Press
key to show the [Sound] menu.
Note: The [Sound] menu can also be opened by press-
ing the
3.1.1

Notification sound setting

You can set the sound volume and ring pattern for internal and external phones and
notification for SMS messages and system messages.
How to set the volume
1. In the [Sound] menu, press either the 1, 2, 3, or 4 key for the following items:
1: External phone incoming notification volume
2: Internal phone incoming notification volume
3: SMS message notification volume
4: System message notification volume
2. Press 1 to select [Volume] to show the below-right figure.
3. Press
for no sound.
Note: Press the
lected volume. Press the
tone.
4. Press the Enter key.
5. Press the
to select the [Sound] icon, and press the Enter
key at the idle screen.
or to adjust the volume level (0 - 7). Set to [0]
key to hear the ringtone at the se-
key to close the menu.
key again to stop the ring-
3-1