3.
SETTINGS
3.1
Display Menu
3.1.1
How to set the time for smoothing
When the receiving condition is unfavorable, the GPS fix may change randomly, even
if the boat is dead in water. This change can be reduced by smoothing the raw GPS
fixes. The higher the setting the more smoothed the raw data, however too high a set-
ting slows response time to change in latitude and longitude.
1. Press the MENU ESC key to open the main menu.
2. Select [1 Display] then [3 Smoothing].
3. Select [1 VTG].
4. Enter the time (unit: second) for smoothing
of the antenna transmission speed with
the numeric keys.
5. Move the cursor to [Enter] then press the
ENT key.
6. Set [2 L/L], [3 VBW], [4 Wind] and [5 ROT] as well.
[L/L]: Position
[VBW]: Ship's 3-axis speed
[Wind]: Wind
[ROT]: Rate of turn
7. Press the MENU ESC key to close the main menu.
3.1.2
How to set the current direction and wind angle
Note: These functions require the external input.
1. Press the MENU ESC key to open the main menu.
2. Select [1 Display] then
[4 Current/Wind].
3. Select [1 Current].
4. Select [1 Flow to] or [2 Flow from].
[Flow to]: The direction of the currents is shown as flowing
to.
[Flow from]: The direction of the currents is shown as flowing from.
3-1