Status Monitor - Furuno Felcom 250 Operator's Manual

5. WEB SOFTWARE
5.3

Status Monitor

The Status monitor displays satellite tracking status, communication status, ship po-
sition information, Communication Unit internal temperature, and error information.
Data is refreshed every five seconds. If the Status monitor is not displayed, do the fol-
lowing to view:
1. Click [Main] in the menu bar.
2. Click [Status monitor] in the sub menu. The [Status monitor] appears as shown:
Refer to the following table description of Status Monitor items:
Item
Tracking status: Satellite tracking information
Satellite
Channel/Status
Satellite azimuth
Antenna elevation
Signal strength
Interference
Communication status: Communication information
Voice & FAX/ MV*
Data connection
Data size
5-4
Name of Satellite that is being tracked.
Channel: Displays the searching or tracking channel (Primary/Al-
ternate).
• Primary: First global channel frequency
• Alternate: Second global channel frequency
Status: Displays satellite tracking status. Searching (searching for
satellite), Tuning (antenna fine tuning), Tracking (tracking satel-
lite), Blocking (satellite signal is blocked).
Displays satellite bearing, North as reference.
Displays antenna elevation angle.
Displays signal reception level in the modem.
"Detected" is displayed when interference signal is detected.
*1
Display voice communication status.
4
--- (unavailable), Ready (Line is ready), Voice (Phone in use), Fax
(Fax in use), UDI
Displays data communication status. --- (Not available), No per-
mission (No connection permission), Not connected, Connected
(in green). The status of all groups is shown if logged in as Admin-
istrator. "Connected" if one or more groups is connected; "Not
connected" if no groups are connected.
Displays packet traffic volume of group affiliated with the PC cur-
*3
rently in use. If logged in as Administrator, the packet volume for
all groups/PPPoE sessions is shown. If there is no satellite ac-
quired "---" appears.
See "IMPORTANT NOTICES" (page i).
Description
*2
(ISDN UDI in use), RDI
*2
(ISDN RDI in use)