Pppoe Settings - Furuno Felcom 250 Operator's Manual

6. WEB FUNCTIONS
6.1.10

PPPoE settings

The FELCOM can connect (dial-up connection) to the internet via PPPoE. With the
Web software and PC set up for PPPoE, the dial-up application directly controls con-
nection and disconnection of the data line. (It is not necessary to boot the Web soft-
ware to connect to the internet.) The PPPoE settings must be done by the network
administrator.
How to set PPPoE session
Click [Settings], [Network settings], [PPPoE] and [Session settings] to show the [PP-
PoE/Session settings] window.
Item
Delete button
Add session button
Session
APN
Global IP
Settings button
Entry screen
Session name
Username for PPPoE
Password for PPPoE
6-24
Delete the item having a checkmark [ ]. A session cannot be de-
leted during PS*. *PS=Packet Switching
Create a new session. Up to three sessions can be created. The
creation screen appears.
Display session names.
Display connection destinations. (If connection destination is reg-
istered in the SIM card: "(SIM) connection destination" appears.
• Data connection in use: Global IP address is shown.
• Not connected: "---" appears.
Show the session setting screen. The session setting screen has
six types of setting screens. (Session can be registered to each
screen.)
Item
Enter session name.
Enter user name
than space, ", . Maximum of 20 characters.
Enter password
than space, ", . Maximum of 20 characters.
No. of registrations/No. of registrations available
Description
Description
*1
for PPPoE. Use ASCII characters other
*1
for PPPoE. Use ASCII characters other