Furuno Felcom 250 Operator's Manual page 28

1. BASIC OPERATION
Web
Soft-
ware
*1
The factory set password is "01234567".
*2
SMS password for handset and web software is commonly used.
How to enter the password
This section explains how to enter the operation password. When prompted for a
password, do the following:
1. Press the Enter key to open the password input screen.
2. Enter the password, and press the Enter key.
Press the
3. Press the
Note: If the entered password is wrong, the message "Incorrect" appears. Enter
the correct password.
1-14
Password
Log pass- When opening logs.
word *1
Administrator When logging in as administrator.
password*1
SMS pass- When opening SMS top menu.
*1, *2
word
extension line When registering a new extension line.
password Password is the same as handset SIP
password.
PPPoE pass- When connecting to the internet by PP-
word PoE.
key to change between input modes:
key to select [OK], then press the Enter key.
Use
Available character
count
Input mode:
abAB: Alphabet entry
1234: Numeric entry
Password
Update
Refer to
paragraph 5.9.1.
Refer to
paragraph 6.1.13.
Refer to
paragraph 6.1.13.
Refer to page 6-2.
See page 6-24.