Listening To Radio; Selecting The Band; Manual Tuning; Auto Tuning - Sherwood RX-4508 Operating Instructions Manual

RX-4508 AM/FM STEREO RECEIVER

Listening to Radio

Selecting the Band

1
Select FM or AM tuner as the input
source.
• On the main unit, press INPUT
repeatedly.
• On the remote control, press TUNER
repeatedly.
PRESET
INPUT
TONE
DIRECT
• When FM stereo broadcasts are poor,
select FM mono mode to reduce the
noise. For details, see "Switching FM
Stereo/Mono Mode" on page 20.

Manual Tuning

1
Select a desired station.
• On the main unit, press ◄ or ►
repeatedly.
• On the remote control, press TUNE ◄
or TUNE ► repeatedly.
TONE
DIRECT
BLUETOOTH
18
MO/ST SLEEP
0
CD AUX PHONO TUNER
VOLUME
MUTE
VOLUME
MUTE
MEMO/
ENTER
L
R
SEARCH
DISPLAY MODE

Auto Tuning

1
Press and hold TUNE ◄ or TUNE► for
more than 1 second.
• On the main unit, press and hold ◄ or
► for more than 1 second.
• The tuner keeps searching until a
station with strong signal strength is
found. The display shows the tuned
frequency.
• If the found station is not the desired
one, simply repeat this operation.
• Stations with weak signal strength are
skipped during auto tuning.
TONE
DIRECT
L
BLUETOOTH

Manual Presetting

1
Tune to the desired station with auto or
manual tuning.
2
Press MEMO/ENTER.
• On the main unit, press MEMORY.
• "AUTO MEM" blinks on the display
panel.
TONE
DIRECT
MEMORY
L
BLUETOOTH
VOLUME
MUTE
MEMO/
ENTER
R
SEARCH
DISPLAY MODE
VOLUME
MUTE
MEMO/
ENTER
R
SEARCH
DISPLAY MODE