Listening To Radio Broadcasts - Sherwood RX-772 Operating Instructions Manual

LISTENING TO RADIO BROADCASTS

Auto tuning
.
1
Select the tuner.
.
2
Select the disired band.
.
3
Press the TUNING UP/DOWN (▲ ▲ /▼ ▼ , , +/-) buttons for more than 0.5 seconds.
Manual tuning
Band Frequency
• Each time this button is pressed, the band is
changed as follows :
� FM STEREO � FM MONO � AM
(" " lights up) ("
• When FM stereo broadcasts are poor because of
weak broadcast signals, select the FM mono mode
to reduce the noise, then FM broadcasts are repro-
duced in monaural sound.
• When pressing the BAND button or the TUNER
button without selecting the tuner, the tuner will be
selected automatically.
• The tuner will now search until a station of sufficient
strength has been found. The display shows the
tuned frequency and "
• If the station found is not the desired one, simply
repeat this operation.
• Weak stations are skipped during auto tuning.
• Manual tuning is useful when you already know the
frequency of the desired station.
• After selecting the tuner and the desired band,
press the TUNING UP/DOWN (
repeatedly until the right frequency has been
reached.
15
" lights up)
" or " ".
+/-) buttons
▲ ▲ /▼ ▼ ,