Table of Contents
Advertisement
Troubleshooting
If you experience any of the following difficulties while using the system, use this troubleshooting
guide to help remedy the problem before requesting servicing. Should any problem persist, consult
your nearest authorized dealer or authorized independent company.
If the unit does not operate normally due to external influence such as static electricity, disconnect
the power plug from the outlet and insert again to return to normal operating conditions.
GENERAL
Problem
The power does not
turn on.
The system suddenly
turns off.
No sound is heard after
a function is selected.
Can't operate the
remote control.
The display is dark or off.
SOUND
Problem
There is no sound
from the selected
component.
Sound is interrupted or
there is noise.
The left and right
sounds are unbalanced
or reversed.
Recording cannot be
carried out.
No sound, or sound
suddenly ceases.
24
•
Disconnect the power plug from the outlet, and connect again.
After about a minute (you won't be able to turn the main unit on during this
•
time), turn the system back on. If the problem persists, call an authorized
independent service company.
•
Make sure the component is connected correctly.
(See "Making Connections" on page 9.)
Press MUTE to restore the sound.
•
Replace the batteries. (See page 5.)
Operate within 7 m, and 30° of the remote sensor
•
•
Remove any obstacles, or operate from another position.
Avoid exposing the remote sensor on the front panel to direct light.
•
Press DIMMER on the control repeatedly to return to the default setting.
•
•
Check that the component is connected correctly to the audio input jacks of
components.
•
Ensure that the cords are fully inserted into the jacks on both the component
and the main unit.
•
Ensure that the component is selected correctly.
Check the output audio formats support system.
•
•
Check that the speakers and equipment are connected securely.
Move your audio equipment away from the TV.
•
•
The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with
alcohol.
•
Ensure that the speakers and equipment are connected correctly and securely.
•
Ensure that the equipment is connected correctly.
Select the source equipment using the input buttons (See page 16).
•
•
Copyright protection to prevent recording is contained in the sources. In this
case, you may not be able to record from the sources.
•
Check the audio output settings of the source component.
Remedy
Remedy
Hide quick links:
Advertisement
Table of Contents
