Using The Audio Cable - Sennheiser Momentum Wireless M2 OEBT Instruction Manual

Using the headphones
24 | M2 OEBT

Using the audio cable

There are 2 connection modes when you use the audio cable:
Active mode - the audio cable is used and the headphones are switched on.
X
Passive mode - the audio cable is used and the headphones are switched off.
X
Regardless of the connection mode, Bluetooth and the call and music control
functions are disabled if the audio cable is used. Use the audio cable only when:
– the headphones' battery pack is empty
– wireless transmission is not allowed, e. g. during aircraft take-off and
landing
Connecting using the audio cable
1. Plug the 2.5 mm jack plug into the audio input of the headphones until you
hear a click sound. Turn the jack plug counterclockwise and ensure that it is
securely locked in place.
The Bluetooth connection is disabled.
2. Connect the 3.5 mm jack plug to:
– the audio output of your smartphone
– the in-flight adapter if you want to use the headphones with an in-flight
entertainment system
In active mode, the NoiseGard active noise cancellation feature is enabled; in
passive mode, the active noise cancellation feature is disabled.
1
2
2
2
1
Click
1
MO ME
NTU M