Video Output - ATN TTWS Series Operator's Manual

2. Place the scope onto rail. Be sure to engage the recoil lug into
the groove on the top mounting surface of the rifle.
3. Turn the cam backwards pushing the latch to close the mount
(arrow B).
4. The QRM may be adjusted to eliminate excessive play when
mounted on the rail by using the adjustment knob on the lever to
release the lever from the adjuster.

2.2.2. VIDEO OUTPUT

This version of the TTWS Sightng System is equipped with the
added feature of being able to connect directly to a remote video
monitor or recorder via an integrated 8 PIN port.
This version of the TTWS Sighting System is equipped with the
added feature of being able to connect directly to a remote video
monitor or recorder via an integrated 8 PIN port.
To use this feature, the following optional components are required
(see illustrations below):
1. 8 PIN-to-BNC adapter.
FIGURE 2.6. VIDEO CABLE WITH 8 PIN TO RCA
FIGURE 2.5. WITH VIDEO CABLE
2-5