Sherwood RD-606i Operating Instructions Manual page 20

RD-606i(A)_ENG_110414_RD-606i(A)_ENG 2011-05-04 오후 2:13 페이지 20
Adjusting each channel level with test tone
• The volume level of each channel can be adjusted easily with the test tone function.
■Note : When the SPEAKER button is set to off, the test tone function does not work.
1.
Enter the test tone mode.
• The test tone mode is displayed and will be heard from
the speaker of each channel for 2 seconds as follows:
→ FL → C → FR →
Front Center Front
Left Right
• When the speaker setting is "NO", the test tone of the
corresponding channel is not available.
→ →
SR SL SW
Surround Surround Subwoofer
Right Left
2.
At each channel, adjust the level as desired until
the sound level of each speaker is heard to be
equally loud.
TUNE
• You can select the desired channel with pressing the
CURSOR UP(▲)/DOWN(▼) buttons.
3.
Cancel the test tone function.
20