Sherwood RD-6513 Quick Start Manual

Hide thumbs Also See for RD-6513:

RD-6513(AG)-Quick 2008.8.21 12:23 PM 페이지 1

■When CD or VIDEO 1 ~ 2 is selected as an input source

1. Depending on how to select a surround mode, press the [SURROUND] button to select the auto surround mode

or the manual surround mode.

Auto Surround Mode : The optimum surround mode will be automatically selected depending on the signal format

([AUTO]) lights up)

Manual Surround Mode : You can select the desired of different surround modes selectable for the signal being

([AUTO]) goes off)

■Note :

• When the input source other than CD and VIDEO 1 ~ 2 is selected, you cannot select the auto surround mode and

can select the surround mode as desired (the manual surround mode).

■When selecting the manual surround mode.

2. Rotate the [MULTI CONTROL] knob or press the [SURROUND </>] buttons to select the desired surround mode.

• Then the surround mode changes depending on the input signal format.

■To cancel the surround mode for stereo operation.

3. Press the [STEREO] button.

• Then either the stereo mode or the 2 CH downmix mode is selected depending on the signal format which is

being input.

• To cancel either the stereo mode or the 2 CH downmix mode, rotate the [MULTI CONTROL] knob or press the

[SURROUND </>] buttons to select the surround mode.

■Note :

• You should adjust the speaker settings for the optimum sound acoustics according to your environment and

speaker layout. (For details, refer to "SETTING THE SPEAKER SETUP" on the main operating instructions.)

Enjoying Surround Sound

being input.

input with using the [MULTI CONTROL] knob or the [SURROUND </>] buttons.

5227-00000-076-0S

Table of Contents

Page 1: Enjoying Surround Sound
RD-6513(AG)-Quick 2008.8.21 12:23 PM 페이지 1 Enjoying Surround Sound ■When CD or VIDEO 1 ~ 2 is selected as an input source 1. Depending on how to select a surround mode, press the [SURROUND] button to select the auto surround mode or the manual surround mode.
Page 2: Placing Speakers
RD-6513(AG)-Quick 2008.8.21 12:23 PM 페이지 2 • This guide shows you how to connect your speakers and DVD player and enjoy multi-channel surround sound. • For full details on using this unit, refer to the main operating instructions. • Please be certain that this unit is unplugged from the AC outlet before making any connections. Placing Speakers ■If you have 5.1 ch speakers 1.
Page 3 RD-6513(AG)-Quick 2008.8.21 12:23 PM 페이지 3 Connecting TV & DVD Player ■Connecting a TV • Connect the TV to the same type of Monitor video output that you did connect to the DVD player, as shown. ■Connecting a DVD Player •...
Page 4: Turning On The Unit
RD-6513(AG)-Quick 2008.8.21 12:23 PM 페이지 4 Turning on the Unit 1. Connect the AC input cord. 2. Press the [POWER] switch on the front panel to enter the standby mode. 3. In the standby mode, press the [ON/STANDBY] button on the front panel or [POWER ON] button on the remote control to enter the operating mode.