System Maintenance Menu - Oki C910 Troubleshooting Manual

5. Adjustment
The printer is adjusted by key operation on the Maintenance Utility and the Operator Panel.
Select the menu according to the items to adjust and the purpose of adjustment.
5.0

System Maintenance Menu

This menu is launched by turning on the power source while keeping the [Menu+]+[Menu-]+[Help]
switches pressed.
The menu display is only available in English regardless of destination.
• This menu can be modified according to the destination, etc. Therefore, it is not
Note
open (closed) to the end user.
• C910 needs password to enter the System Maintenance Menu. Default is "000000".
Do not reset the OKIUSER Setting of the C930 Series.
Caution
Resetting OKIUSER resets settings made in it, including its model name and server
name. When the OKIUSER menu has been entered on it, press the Return button
to exit from the menu.
Category Item
System OKI USER
Maintenance
Maintenance
Menu
Maintenance
Print Menu
Print Page
Count
Personality
Change
Password
Diagnostic
Mode
Table 5-0. Maintenance Menu Display Table (1/2)
Value DF Old Menu
ODA * "SYSTEM
OEL MAINTENANCE
APS MENU" -
JP1 "OKIUSER" -
JPOEM1 "OKIUSER"
OEMA
OEML
NEXT
Enable
Disable *
Enable "SYSTEM
Disable * MAINTENANCE
MENU" - "PAGE
CNT PRINT" -
"PAGE CNT PRINT"
NEXT
NEXT
"SYSTEM
MAINTENANCE
MENU"-
"DIAGNOSTIC
MODE XX.XX"
Troubleshooting Guide Page 3
Function
Set the destination.
JPOEM1: Japan OEM
OEMA : A4 Default Overseas OEM
OEML : Letter Default Overseas OEM
Automatically reboot after escaping
from the menu.
The default value for non-PS
models is JP1.
This displays the menu to initialize
the harddisk and Flash ROM.
This switches whether to Show/
Hide the "Print Information" – "ID
Check Pattern" and "Engine Status"
of the Function Menu. If this item
is disabled, the "Print Information"
– "ID Check Pattern" and "Engine
Status" of the Function Menu is
never displayed.
The printer is restarted after the
settings are modified and escaping
from the menu.
This sets whether to Show/Hide
the display of the "Functions"-
"Configuration" - "Print Page
Count"-"Total Page".
This displays the menu to edit the
default PDL language supported
according to destination.
This goes to the engine's self-
diagnosis mode.
Oki Data CONFIDENTIAL
Vailid Save
RB -
ET -
ET -
ET -