7-6. Changing Engine Oil, Oil Filter, and Fuel Filter (Onan-Powered Units)
Full
Tools Needed:
3
1
Y Stop engine and let cool.
1
Oil Drain Valve
2
1/2 ID x 7 in Hose
3
Oil Filter
Change engine oil and filter ac-
cording to
manual.
Y Close valve and valve cap
before adding oil and
running engine.
Fill crankcase with new oil to full
mark on dipstick (see Section
7-1).
4
Fuel Filter
5
Fuel Line
Replace line if cracked or worn.
Install new filter. Wipe up any
spilled fuel.
Start engine, and check for fuel
leaks.
Y Stop
engine,
4
connections as neces-
sary, and wipe up fuel.
5
2
engine
owner's
tighten
802 353-A / S-0842
OM-945 Page 25