Engine Prestart Checks (Onan-Powered Units); Engine Prestart Checks (Kohler-Powered Units) - Hobart Champion 10,000 Owner's Manual

Hobart champion 10,000 welding machine
Hide thumbs Also See for Champion 10,000:
Table of Contents

Advertisement

4-2. Engine Prestart Checks (Onan-Powered Units)

Full
Full
Gasoline

4-3. Engine Prestart Checks (Kohler-Powered Units)

Full
Gasoline
Full
Check all fluids daily. Engine must be
cold and on a level surface. Unit is
shipped with 10W30 engine oil.
Engine stops if oil pressure gets too low.
.
Follow run-in procedure in engine
manual.
.
This unit has a low oil pressure shut-
down switch. However, some condi-
tions may cause engine damage be-
fore the engine shuts down. Check
oil level often and do not use the oil
pressure shutdown system to moni-
tor oil level.
Fuel
Add fresh fuel before starting engine the
first time (see maintenance label for
specifications). Fill fuel tank up to 1/2 in.
(13 mm) from top to allow room for ex-
pansion (see fuel tank window on base).
Check fuel level on a cold engine before
use each day.
Oil
After fueling, check oil with unit on level
surface. If oil is not up to full mark on dip-
stick, add oil (see maintenance label).
.
To improve cold weather starting:
Keep battery in good condition.
Store battery in warm area off con-
crete surface.
Use correct grade oil for cold weath-
er.
Check all fluids daily. Engine must be
cold and on a level surface. Unit is
shipped with 10W30 engine oil.
Engine stops if oil pressure gets too low.
.
Follow run-in procedure in engine
manual.
.
This unit has a low oil pressure shut-
down switch. However, some condi-
tions may cause engine damage be-
fore the engine shuts down. Check
oil level often and do not use the oil
pressure shutdown system to moni-
tor oil level.
Fuel
Add fresh fuel before starting engine the
first time (see maintenance label for
specifications). Fill fuel tank up to 1/2 in.
(13 mm) from top to allow room for ex-
pansion (see fuel tank window on base).
Check fuel level on a cold engine before
use each day.
Oil
After fueling, check oil with unit on level
surface. If oil is not up to full mark on dip-
stick, add oil (see maintenance label).
.
To improve cold weather starting:
Keep battery in good condition.
Store battery in warm area off con-
crete surface.
Use correct grade oil for cold weath-
er.
OM-945 Page 13
802 353-A
802 339-A

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents