OSD Information Display
The channel number, video size, and IP address of the connected
NVR are displayed.
This icon will appear if the audio signal is currently being output.
The current date and time will be displayed according to the
selected time information display setting <NVR Time> or
<PC Time>.
Alarm icon appears when alarm is issued.
It disappears when pressed the [ALARM] button of the NVR.
Motion icon appears when motion is detected.
It disappears when pressed the [ALARM] button of the NVR.
It displays whether the PTZ controls are active.
M
`
If you have set PTZ cameras for the NVR, "PTZ" is displayed on the screen. Select a PTZ camera channel and use the [PTZ]
button for camera control.
Split-Screen
You can change the split mode by clicking each number icon.
<SINGLE MODE>
• Click <
> button.
The screen displays the selected camera connected to the NVR in
"SINGLE MODE".
• Click <
> button.
The screen displays the selected camera connected to the NVR in
"QUAD MODE".
• Click <
> button.
The screen displays the selected camera connected to the NVR in
"NINE MODE".
• Click <
> button.
The screen displays the selected camera connected to the NVR in
"SIXTEEN MODE".
• Click <
> button.
The screen displays the selected camera connected to the NVR in "FULL SCREEN MODE".
Double clicking on the screen or pressing any button of the keyboard returns to the previous mode.
<QUAD MODE>
<NINE MODE>
<SIXTEEN MODE>
English _89