Remote Control; Using The Numeric Buttons - Samsung SRN-470D User Manual

REMOTE CONTROL

Displays the search menu.
Changes the screen mode.
Displays the Exit pop up screen.
NUMBER [0~ + 10]
Used as the numeric input keys, or displays a single
Skip Backward (by unit time), Slow Rewind,
Slow Forward, Skip Forward (by unit time)
Goes to the menu screen.
Up/Down/Left/Right(▲▼◄►)/ENTER
Moves the cursor up/down/left/right, and runs the Select
Freezes the screen temporarily.
Runs the digital zoom (x2) function.
Starts or ends the live recording.
Runs the View function in the PTZ mode.

Using the numeric buttons

CHANNEL 10
CHANNEL 11–16
Changing the Remote Control ID
1. Press the [ID] button of the remote control and check the ID displayed on the NVR screen.
The factory default ID of the remote control is 00.
2. Press desired 2-digit code while holding the [ID] button of the remote control.
3. Once entered, press the [ID] button of the remote control to verify your input.
M
`
When changing remote control ID to 08: Press [0] and [8] in sequence while holding the [ID] button of the remote control.
Remote control's ID and NVR's ID should be matched for proper operation. Refer to "Remote Devices". (Page 61)
SEARCH
MODE
POWER
channel.
T/W
Zooms in or out.
MENU
Menu.
FREEZE
ZOOM
REC
VIEW
Press the [ + 10] button first, then press the 0 button again within 3 seconds.
Press the [ + 10] button first, then press any number between 1 to 6 within 3 seconds.
BACKUP
Displays the Backup Menu.
OPEN/CLOSE
Opens or closes the CD tray.
DVR/NVR
Activates the NVR function.
ID
Sets the ID of the system.
Select 2 digits from 0 ~ 9 while pressing the ID Key.
Move Frame
While paused, moves to the previous/next frame.
FR, STOP, PLAY/PAUSE, FF
PTZ
Displays or ends PTZ.
SCROLL ,.
Moves the menu scroll.
RETURN
Returns to the previous screen.
AUDIO
Turns Audio on/off.
ALARM
Cancels the Alarm.
REC LOCK
Selects the recording lock function.
PRESET
Displays the Preset Setup.
English _13