Samsung SRN-470D User Manual page 76

menu setup
DDNS
You can set the DDNS site for a remote user's network connection.
[MENU]  ▼  <Network>  ►▼  <DDNS>  [ENTER]  ▲▼◄► [ENTER]
• DDNS Site : Specify the use of DDNS and select a site that you registered.
• Host Name : Provide the host name that you registered with the DDNS site.
• User Name : Provide the user ID that you registered with the DDNS Site.
• User Password : Provide the password that you registered with the DDNS site.
M
`
Refer to "Using Virtual Keyboard". (Page 45)
`
If you select <OFF>, the input box will be inactive.
`
If you select <iPOLiS>, the host name input box will be inactive. The user name input box will be active.
• Quick Connect : Appears if the <iPOLiS> is selected for a <DDNS Site>.
To use the function, set to <Use> after connecting the NVR to a UPnP router.
M
`
If canceled during Quick Connect configuration, it automatically switches to <Not Use> and saved.
To check Quick Connect status
A progress bar and its message appears for a Quick Connect.
• Quick Connect Success : Message for a successful connection.
• Invalid Network Configuration : Message appears if the network configuration is not valid. Check the
configuration.
• Please enable UPnP function of the router : Message appears if the router requires UPnP function
enabled.
• Failed to find the router : Message appears if the router is not found. Check the router's configurations.
• Please restart the router : Message appears if the router should be restarted.
76_ menu setup