Unpairing An Accessory; Cordless Module Led Indicators; Using A Cordless Device As A Remote Control - Mitel 5330e User Manual

6. The LED on the Bluetooth Module lights and remains lit for a few seconds and then
resumes normal behavior. The Bluetooth device is paired to the Bluetooth Module.
7. Press OK to return to the Cordless Devices application.
8. Press Close to exit the application.

Unpairing an Accessory

To unpair a cordless accessory:
1. Press the blue Applications
2. Press the device name that you want to unpair. The information screen for the selected
device appears.
3. Press Unpair this Device. If the accessory is in use, an error message is displayed.
Otherwise, the accessory is unpaired, removed from the display, and can no longer be
used to interact with the phone.
4. Press Close.
For more information about the Cordless Devices Application, see page 82.

Cordless Module LED Indicators

The Cordless Module has a blue light-emitting diode (LED) that indicates the current status of
the module:
Blue LED
Solid
Blinking
Off
Solid for several seconds
Blinking: LED is On and Off for equal amount of time

Using a Cordless Device as a Remote Control

When not being used to talk, the buttons on a Mitel-branded cordless handset/headset can
act as a remote control device to change volume and mute settings on the host IP phone. For
example, in a remote hands-free conference setting, the chairman can use the volume and
mute buttons on a cordless device to adjust speaker levels and mute the microphone on an
IP phone that is not within his reach. HTML applications may also make use of the cordless
device buttons, but functionality may differ among applications.
key and then press Cordless Devices.
Audio is active between the module and either the handset or headset.
Pairing mode is active or a firmware upgrade is in progress.
No audio is active.
Pairing is successful.
- 75 -
5330e/5340e IP Phones – User Guide
Function