Table of Contents
Advertisement
Operation
Table of Contents
Deactivating / Activating channels
The user can remove from the Belkin Secure Windowing KVM display
inactive channels. In order to deactivate a channel the user should enter
system mode and then move the system cursor to the desired channel
button at the task bar and double-click on it. Red X should appear on that
channel (see figure below).
In some cases the user may want to deactivate a live channel for
operational reasons. The Belkin Secure Windowing KVM will display
instead on that channel a background color.
In this example channel #1 was deactivated
Repeating this process will cancel this status and reactivate that channel.
Once a channel had been deactivated it would not participate in cyclic
toggling between windows and will not be displayed in anyway.
Dual display operation [F1DN204M only]
Maximizing a window
When in system mode, double-clicking on a window will maximize that
window to full screen. If the window is shown on both displays it will
maximizes at the display where a larger portion of that window lying at.
For example: if 60% of the window is at the primary display – it will
maximize at the primary. When it is maximizing – the other 40% of that
window will disappear from the secondary display. The second monitor will
still display the same windows as before accessing the full screen mode.
Any other windows on the display to which the window was maximized
will be hidden behind the maximized window.
Belkin® Secure 4 port Windowing KVM Switch User Manual
SECTIONS
1
2
3
In dual display mode, the tile function will place channels 1 and 3 windows
on the primary display and channels 2 and 4 windows at the secondary
display.
34
4
5
6
7
Advertisement
Table of Contents
