Belkin F1DN104M User Manual page 32

Operation
Table of Contents SECTIONS 1 2 3 4 5 6 7
Dragging a Window
In order to move a window user should first switch to system mode by
pressing + or – mouse side buttons. In system mode, hold the left mouse
button when the system cursor located on the desired window and the
window will move. Release left mouse button to drop window in place.
Notes: Window movement to the left side is limited by the display
boundary.
Window movement to the right side is unlimited (window may be pushed
out of the display viewable area).
Window Resizing
In order to resize a window the user should first switch to system mode by
pressing + or – mouse side buttons. In system mode, the user should drag
the mouse while holding the right mouse button when the system cursor
located on the bottom right corner of the desired window. Release right
mouse button to freeze window size.
Note: Window size is limited by the size set for the window under the
channel menu.
The Help button bitmap
Window Internal Scroll
When window size is smaller than input image size it might be required to
"move" the image inside the window. This is done by pointing at the
window, pressing both mouse buttons at the same time and moving the
mouse. Release the mouse buttons to freeze the position of the window.
Help button
The "?" button located at the task bar (see figure below) show mouse
functionality bitmap with mouse functions.
32
Belkin® Secure 4 port Windowing KVM Switch User Manual