Table of Contents
Advertisement
under it.
•
Double clicking on a window will maximize that window to full
screen.
•
Right click on the bottom right corner of a window and dragging
will allow changing the window size (limited by the size set under
the channel menu).
•
Pressing both right and left keys on an active window will allow
moving the picture inside the window (only applicable of the
source resolution is larger the window size).
•
Pressing and holding the +/- side mouse buttons and moving the
mouse wheel will rescale the window (change the size of the input
picture). This will be further explained in the scaling part of this
manual.
Change of Active Window
When in system mode there is always one window which is considered as
the active window. The active window top left corner will be marked in
white (as appose to black in all other windows) and its icon on the task bar
will show as pressed.
Active Window is the window which the keyboard, audio and CAC device
mapped to. In normal mode the mouse will also be mapped to this
window.
Switching between active windows (when in system mode) is simply done
by right clicking on another window with the mouse curser. Another option
is pushing the front panel push buttons or using DCU.
Another option to switch between active windows in system mode is by
using the wheel in the mouse. Windows will move to the front at a cyclic
sequence.
Moving Between Windows in Normal Mode
Belkin® Secure 4 port Windowing KVM Switch User Manual
When in normal mode moving between windows can be done either by
switching to system mode (by pressing the mouse side buttons), pointing
at the new window and switching back to normal mode (by pressing the
mouse side buttons again). Another option is to use the front panel push
buttons or optional DCU.
31
Advertisement
Table of Contents
