Initial Set Mode Programming - Icom ic-U80 Instruction Manual

10
SET MODES

■ Initial Set mode programming

The Initial Set mode can be accessed at power ON and al-
lows you to set seldom-changed settings, to suit your prefer-
ence and operating style.
• Key-touch beep (p. 45)
• Squelch burst (p. 49)
• Auto Low power (p. 49)
• Battery protection function (p. 49)
• Voltage display (p. 48)
44
• Time-out timer (p. 45)
• Auto power-OFF (p. 45)
• Microphone simple
mode (p. 48)
• Select speed (p. 47)
D Initial Set mode operation
q While holding down [p] and [q], turn the power ON to
enter the Initial Set mode.
w Push [p] or [q] to select the desired item.
e Rotate [VOL] to select the option or value.
r To exit the Initial Set mode, push [# ENT].
• Lockout (p. 45)
: Push
: Push
• Power save (p. 47)
• Squelch delay (p. 46)
• DTMF speed (p. 46)
• Dial assignment (p. 46)
• Display type (p. 46)
• LCD contrast (p. 47)