Specifications (Eu Version) - Vertex Standard VX-230 Series Service Manual

Specifications (EU Version)

General
Frequency Range:
Number of Channels:
Power Supply Voltage:
Channel Spacing:
Battery Life (5-5-90 duty):
Temperature Range:
Frequency Stability:
RF Input-Output Impedance:
Battery Pack:
Dimension (W x H x D):
Weight (Approx.):
Receiver (Measurement per EN 300 086)
Sensitivity (20 dB SINAD):
Adjacent Channel Selectivity:
Intermodulation:
Spurious and Image Rejection:
FM Noise:
Spurious Emission:
Audio Output:
(Measurement per EN 300 08)
Transmitter
Output Power:
Modulation:
Maximum Frequency Deviation:
FM Hum & Noise:
Audio Distortion:
Spurious Emission:
VX-230 Series UHF FM Transceiver Service Manual
400 MHz - 470 MHz (VX-231-EG6B-5)
16
7.4 V DC ±10 %
12.5 / 20 / 25 kHz
10.8 hours (8.8 hours w/o saver) with FNB-V103LIA/FNB-V131LI-UNI
19 hours (15.5 hours w/o saver) with FNB-V104LIA/FNB-V132LI-UNI
–20 °C to +55 °C (Operation)
0 °C to +45 °C (Battery Charging)
Turn the radio off while charging the battery, and use only the Vertex Standard Model
PA-42C/U AC Adapter and CD-34 Desktop.
±2.5 ppm
50 Ohm
FNB-V103LIA / FNB-V104LIA / FNB-V131LI-UNI / FNB-V132LI-UNI
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
58 x 110 x 30 mm with FNB-V103LIA/FNB-V131LI-UNI
58 x 110 x 36 mm with FNB-V104LIA/FNB-V132LI-UNI
287 g with FNB-V103LIA, Antenna, Belt Clip
326 g with FNB-V104LIA, Antenna, Belt Clip
288 g with FNB-V131LI-UNI, Antenna, Belt Clip
329 g with FNB-V132LI-UNI, Antenna, Belt Clip
0.5 μV
70 / 60 dB (25 kHz / 12.5 kHz)
65 dB
70 dB
45 / 40 dB (25 kHz / 12.5 kHz)
–36 dBm (<1GHz), –30 dBm (>1GHz)
500 mW @ 4 ohms 5 % THD
5 / 1 W
Variable Reactance Modulation
±2.5 / ±4.0 / ±5.0 kHz (12.5 kHz / 20 kHz / 25 kHz)
45 / 40 dB (25 kHz / 12.5 kHz)
< 5 % @1 kHz
–36 dBm (<1GHz), –30 dBm (>1GHz)
Specification may be changed without notification.
3