Vertex Standard VX-230 Series Service Manual page 17

Alignment
8. CTCSS D
EVIATION
This parameter is to align CTCSS Deviation of the selected channel.
1. Click the "CTCSS Deviation (W)" or "CTCSS Deviation
(N)" button to open the CTCSS Deviation Alignment win-
dow.
2. Input the desired CTCSS Frequency to the "CTCSS Fre-
quency" Box.
Available input range is 67.0 to 255.9 Hz (default: 151.4
Hz).
3. Click the "PTT" button on the desired frequency which you
wish to alignment. The radio starts to transmit on selected
frequency.
4. Set the value to get desired deviation (Wide: 0.6 kHz, Nar-
row: 0.35 kHz) on the deviation meter by the following ways:
 Drag the slide bar
 Click the up/down button
 Press the left/right arrow key of the computer's keyboard
 Enter the value in the "Data" box from the computer's
keyboard.
5. After getting the desired deviation, click the "PTT" button
to stop the transmit.
6. Click the "OK" button to finish the CTCSS Deviation align-
ment and save the data.
You may select the alignment type from the Radio button (ADJ
Type) located at the bottom of the screen, as needed.
ADJ Type
Single : Alignment value change only to selected channel.
All Freq : Alignment value change for connecting with other
channels.
VX-230 Series UHF FM Transceiver Service Manual
<W > / <N >
IDE ARROW
17